







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Silestone Home Additions & ADU: The Paradise Owner’s Guide
We build Silestone-surfaced home additions and ADUs in Paradise, and a finished, permitted addition typically runs $45,000 – $130,000 depending on square footage, foundation, and how much of the interior gets Silestone quartz (kitchen counters, bath vanities, wet-bar tops). An ADU with a full kitchen and bath usually lands in the $90,000 – $220,000 range because it carries its own utility trenching, separate entrance, and inspection sequence. This is planned construction, not a repair, so there’s no same-day number to hand you here. What we can give you is a written price before any work starts.
Owners in Paradise don’t usually land on this page because a part failed. They land here because they’re weighing a Silestone-topped addition or ADU against moving, and they want to know what the surface actually costs and what can go wrong with it down the road. We’re Sawyer Remodeling Paradise, an independent remodeling company, not affiliated with Silestone. We install and stand behind the material. We don’t sell parts.
Key Takeaways
- Home additions in Paradise: $45,000 – $130,000 installed, with Silestone surfacing budgeted inside that number.
- ADU construction: $90,000 – $220,000, because an ADU is a second dwelling with its own kitchen, bath, and utilities.
- You get a written price before a single tool is picked up, and the invoice matches the number you approved.
- Every project is covered by the 365-Day Done Right Promise.
Which Silestone Models This Applies To

Silestone is engineered quartz, so the “model” that matters isn’t a machine series the way it is for an appliance part. For an addition or ADU, the Silestone decision breaks into three things: the color line (Silestone organizes its slabs into collections, and each collection has its own veining and finish), the slab thickness (the standard is 2 cm and 3 cm; 3 cm is the common pick for kitchen islands where people lean and chop, 2 cm is often paired with a built-up edge), and the edge profile and cutout spec for your sink and cooktop.
Here’s the compatibility gotcha most homeowners miss: your cabinetry and your Silestone have to be coordinated before either is ordered. KraftMaid and Wellborn cabinets come in specific depth and rail heights, and a 3 cm Silestone top with a standard overhang doesn’t drop onto every box the same way. Get the cabinet spec first, then the quartz. We also mix surfaces across a project: Cambria in one room, Silestone in another, Caesarstone in a bath, all backed by the manufacturer. If you’re matching an existing Silestone color for a renovation rather than a ground-up build, bring the exact collection name or a slab photo. Dye lots shift over the years, and a 2024 slab may not read identical to a 2019 one under Paradise’s hard afternoon light.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Silestone Surfaces Are the Wrong Call (Or Failing)
Quartz doesn’t wear out the way a mechanical part does, but it does fail in predictable ways. Each symptom below traces to a cause we can name.
- Hairline cracks radiating from a sink or cooktop cutout. That’s almost always a cutout cut too tight or a missing support rail under the counter, and it lets the quartz flex where it should sit dead flat. In a Paradise addition with a west-facing kitchen, thermal swing across a big sun exposure makes it worse.
- Discoloration or a dull haze near a window. Prolonged direct Nevada sun on certain quartz can yellow or fade the resin binder over time. UV exposure is the culprit, and window placement during design is the fix.
- Visible seams that have opened or darkened. A seam that’s spreading means the two slabs were set without enough substrate support, or the adhesive was worked in the heat. Seams should be nearly invisible and stay put.
- A top that rocks or sounds hollow when tapped. Unsupported spans. Quartz is heavy and unforgiving; if the cabinet run or island base isn’t level, the slab telegraphs it.
- Edge chipping at the sink or a bar overhang. Usually an overhang past the safe unsupported limit, or impact at a thin edge profile. An overhang longer than roughly a foot of unsupported quartz needs a corbel or steel support.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included in Paradise

If you’re pricing a Silestone-topped addition or ADU, here’s how the numbers break down, and what a Silestone surface replacement runs if a counter has to be redone:
| Scope | Installed Range |
|---|---|
| Home addition (full) | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
| Countertop installation (Silestone) | $2,000 – $6,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Bathroom vanity installation | $800 – $3,000 |
What drives an addition’s range: foundation and grading, whether the ADU needs its own utility trench, roof tie-in, and the square footage of Silestone you specify. What drives the counter range: slab collection, thickness, edge profile, and cutout count. You get a line-item written price before work starts, so the number on the invoice is the number you approved. Every project is covered by the 365-Day Done Right Promise, and if something isn’t done right, we make it right, in writing.
DIY or Call Us?
A homeowner can safely do a few things. Check that your Silestone collection name is on the original invoice or fabricator tag, measure your counter depth and thickness, and photograph any crack or discoloration. That’s diagnosis, not repair.
Where DIY goes wrong on quartz is on the install and the support structure, not the material. Silestone slabs are heavy, and a quartz top set without proper substrate, support rails at the cutouts, and correct overhang limits will crack, often months later, when you least expect it. Cutting quartz also releases silica dust that’s a genuine health hazard and requires wet-cutting and proper respiratory protection. We handle design, permits, cabinet coordination, and the Silestone install as one project, with background-checked, uniformed technicians who you’ll know are coming before they arrive. Our technicians have up to 21 years of experience. Call (866) 977-0526 for a free estimate if your Silestone surface has failed or you’re planning an addition in Paradise.
FAQs

With correct installation, Silestone quartz commonly lasts 20 to 30 years, and it needs no sealing. The lifespan in Paradise depends mostly on sun exposure: a kitchen with direct west-facing glass will age faster than one shaded through the afternoon. If a slab is properly supported and out of punishing direct sun, it will outlast the cabinets under it. Call (866) 977-0526 for an exact quote on a replacement or new surface; estimates are free.
Small chips at an edge or a localized seam can often be repaired with color-matched epoxy and look close to new. A crack that runs through a cutout, or one that’s spreading, usually needs the section replaced because the substrate beneath is the real problem. We’ll tell you honestly which side of that line you’re on after we see it. Call (866) 977-0526 for a free estimate.
A single kitchen countertop replacement is typically a template visit, a fabricator turnaround of one to two weeks, then an install day of a few hours. It’s planned work, not same-day. Planning an ADU or addition around Silestone surfacing runs weeks, not days, because of permitting and inspection sequence. Call (866) 977-0526 to schedule your free estimate.
We specify the exact Silestone collection and thickness with you, then order through the authorized channel so the slab is factory-backed and the manufacturer’s warranty holds. We don’t claim to stock slabs locally or carry parts; your material is ordered to your spec. When you want a brand with real manufacturer backing, we also work with Cambria, Caesarstone, KraftMaid, and Kohler. Call (866) 977-0526 for a free estimate.
Whether you’re repairing a failing Silestone surface or planning a full addition or ADU in Paradise, we’ll give you the price range before you commit. Call (866) 977-0526 for a free estimate, and you’ll have a written price before any work starts, live arrival tracking, and before-and-after photos on every visit.
Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.












