







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Bathroom Remodeling: The Paradise Owner’s Guide
Schluter-compatible bathroom remodeling in Paradise typically runs $9,000 to $28,000 installed, and the waterproofing layer (the Schluter membrane and trim your tile sits on) is usually the part that decides whether that money holds up. We install Schluter systems across full bathroom remodels, shower replacements, and walk-in shower installs. Most Paradise owners don’t discover a waterproofing failure until a grout line darkens, a tile edge lifts, or a soft spot shows up underfoot months after the remodel closed.
That delay is the problem. Schluter KERDI and DITRA failures rarely announce themselves. Water tracks under the tile for a season or two while the surface still looks fine, and by the time a Paradise homeowner sees it, the substrate is already wet.
Which Schluter Models This Applies To

Schluter isn’t one product – it’s a system, and matching the right component matters. The lines we install and repair most in Paradise:
- KERDI and KERDI-BAND – the sheet-applied waterproofing membrane and seam banding for shower walls and floors. The 5-inch and 7-inch band sizes are the ones people most often buy wrong.
- DITRA and DITRA-HEAT – the uncoupling membrane for floors and the version with heat cable clips molded in.
- KERDI-LINE and KERDI-DRAIN – linear and center drains built to bond directly to the membrane.
- DILEX and KERDI-TS – movement-joint and edge-trim profiles where tile meets floor, tub, or a different surface.
- KERDI-SHOWER – preformed pans and curb kits, sized by width.
Finding the right part means reading the label, not guessing. Every Schluter box prints its product code and dimension (for example, DITRA at 1/8-inch thickness in 3’3″ x 32’10” rolls, versus the 5/16-inch XL). If the label’s gone, measure the membrane thickness with a caliper and note the roll width – those two numbers narrow it to one or two SKUs.
On OEM versus aftermarket: Schluter holds patents and tolerances that cheaper clones don’t match, particularly on fleece bonding and drain flange fit. We recommend genuine Schluter components for anything under tile. For one item like a tube of KERDI-FIX or a trim profile, a quality equivalent can work, but we won’t put a no-name membrane under a $9,000 Paradise shower and call it waterproofing.
One note on who we are: Sawyer Remodeling Paradise is an independent remodeling contractor. We install and repair Schluter systems, but we’re not affiliated with Schluter Systems.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Bathroom Remodeling Is Failing
- Grout lines turning darker near the shower floor or curb. That discoloration is moisture wicking up through the tile assembly from below – the sign the waterproofing layer has a breach.
- Tile lifting or sounding hollow at the perimeter. Tap a coin across the floor; a dull thud vs. a sharp ring tells you a section has debonded, often where uncoupling membrane wasn’t used or was installed without proper thinset coverage.
- Flexible or soft floor underfoot near the drain. Movement means the substrate is wet and swelling – with DITRA, this points to a failed seam or a missing band.
- Efflorescence or white crust on tile and trim. That’s mineral salt pushed out by water evaporating from within, common in Paradise homes where the bathroom runs humid and air movement is low.
- Musty smell that returns after cleaning. Persistent odor in a Paradise bathroom usually means moisture trapped behind tile, not a dirty grout line.
Nevada’s dry heat makes this harder to catch, not easier. The surface dries fast between showers, so a wet substrate underneath can go unnoticed for a full season.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing for the work this involves in Paradise:
| Scope | Installed range |
|---|---|
| Full bathroom remodel (Schluter waterproofing system included) | $9,000 – $28,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Shower replacement | $3,000 – $8,500 |
| Small bathroom remodel | $5,000 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
What drives the range: how much tile comes out versus staying, whether the pan and drain are being replaced, membrane and trim quantity, tile choice, and whether a failed substrate needs repair before new Schluter goes down. Parts and labor are quoted separately so you can see exactly what the membrane, band, and drain cost against the installation.
Every job comes with a written price before any work starts, backed by our 365-Day Done Right Promise – if it’s not done right, we make it right, in writing. No surprise line items at the invoice.
DIY or Call Us?
You can safely check a few things yourself: look for the darkest grout lines, tap the floor with a coin, note any soft spots, and inspect the drain flange for visible gaps. That’s information-gathering, not repair.
Where DIY goes wrong on a Schluter system is the waterproofing layer itself – membrane seams, band overlaps, and the drain connection. Get it wrong and you’re not backing up a failed shower; you’re building a new one that fails the same way in 18 months. Thinset coverage, seam width, and curing time are unforgiving, and a bead of caulk over a hidden breach doesn’t fix it. Our technicians have up to 21 years of experience reading these failures, and every project carries a written price before work begins and photo updates before and after. Call (866) 977-0526 to schedule your free estimate.
FAQs

A properly installed Schluter waterproofing system should last 25-plus years. That’s under tile, protected from UV and foot traffic, so it outlives surface grout and many tile finishes. The common failure is installation error, not product age – a missed seam or thin thinset coverage can fail within 2 to 5 years. Call (866) 977-0526 for an exact quote – estimates are free.
Sometimes yes – an isolated failed seam or trim profile can be repaired without tearing out the whole shower. But if the substrate underneath is wet or soft, a patch is a temporary fix and the membrane needs to be rebuilt. Call (866) 977-0526 for an assessment before you commit to either path.
A localized repair can finish in one to two days; a full waterproofing rebuild with new tile typically runs 5 to 10 days. The range depends on tile removal, drain replacement, and whether the substrate needs drying time. Call (866) 977-0526 to schedule your free estimate and a written timeline.
We source genuine Schluter components through suppliers who stock the exact product code and dimension for your system – no substitutions on membrane or drains. You’ll see the part and the labor broken out in the written quote before any work starts, backed by our material partnerships and the same manufacturer backing we use across brands like KraftMaid, Cambria, and Silestone.
Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.












