A Sawyer company - serving Paradise, NV
A remodeled primary bathroom with a soaking tub and a walk-in shower
Schluter · Paradise

Schluter Windows & Doors in Paradise, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Paradise
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A low-threshold walk-in shower with a bench and grab bar
A finished backyard cottage with a small covered porch
A remodeled living room with built-in shelves around the fireplace
A single-story rear room addition with tall windows and a new patio
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Windows & Doors: The Paradise Owner’s Guide

We install Schluter-compatible windows and doors in Paradise, and most whole-unit replacements land between $4,500 – $15,000, with impact-rated units in the $8,000 – $25,000 range. When a component fails instead of the whole unit, the fix is usually a part swap rather than a full replacement. Paradise owners tend to find out the hard way: a door drags on the threshold, a window won’t latch in summer heat, or a seal gives out after a dust storm and the frame starts whistling.

Call (866) 977-0526

Which Schluter Models This Applies To

A tile setter installing wall tile in a shower

Schluter systems show up across a wide span of window and door lines, and the part you need depends on which series you have. Before you order anything, find the manufacturer label. On most units it’s a sticker on the top or side of the frame, visible with the sash open. Write down the model number, the rough opening dimensions, and the glass code if there is one. Those three data points separate a drop-in match from a part that almost fits.

OEM versus aftermarket is the real decision. OEM parts carry an exact fit and the original spec, but they cost more and can take longer to arrive. Quality aftermarket equivalents from established suppliers often work fine for seals, gaskets, and hardware. For structural components like hinges on a heavy impact door, we lean OEM. Our technicians have up to 21 years of experience, and that’s the kind of call experience settles.

One compatibility gotcha worth knowing: a door built for an older Schluter frame profile may use a different hinge pattern than the current line, even when the model number looks identical. Measure the hinge spacing before assuming a swap.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Windows & Doors Is Failing

  • The door drags or sticks. That’s usually a worn hinge or a shifted frame, not just a tight seal. Left alone, the drag wears the hinge faster and can crack the frame at the screw holes.
  • A window won’t latch or lock. The locking mechanism has drifted or the keepers have worn. On an impact-rated unit, this matters more because the latch helps the assembly hold under pressure.
  • You feel air or heat coming through the frame. Weatherstripping and seals break down fast in Paradise sun, and once they go, the void lets in dust and pushes your cooling bill up.
  • Condensation or fog between the panes. The sealed glass unit has failed. This one means replacing the glass, not just the gasket, so it’s worth pricing before you assume it’s a small job.
  • Visible cracks, rust, or pitting on the hardware. Some finishes don’t hold up to desert heat and grit the way the manufacturer intended past the warranty window. Hardware failure often shows up before the frame does.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A built-in window seat in a bay window

In Paradise, a window or door replacement runs $4,500 – $15,000 for a standard unit, while impact window installation runs $8,000 – $25,000. The range depends on unit size, glass spec, frame material, and how much trim and finish work the opening needs. We give you the price range in dollars on the page because you shouldn’t have to call just to know if it’s in your ballpark.

What drives the top of the range: impact-rated glass, custom sizes, and doors with heavy hardware. What’s included on every job: the written price before any work starts, background-checked and uniformed technicians, and a 365-Day Done Right Promise that makes it right in writing if it isn’t. You approve the number before we pick up a tool.

DIY or Call Us?

You can safely check the label, measure the opening, and tighten exposed hinge screws. You can also confirm whether a seal is missing or just dirty. What goes wrong for a homeowner: forcing a warped frame, swapping a hinge with the wrong screw pattern, or resealing an impact unit in a way that voids the manufacturer’s rating. On a heavy door or an impact window, a bad swap can compromise the assembly’s performance and your insurance standing.

If the part involves the frame, the glass, or the locking hardware on an impact unit, call (866) 977-0526. We’ll tell you whether it’s a parts fix or a full unit replacement, and give you a free estimate before anything is ordered. Estimates are free.

FAQs

A whole-home remodel with the living, dining and kitchen areas opened up

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A walk-in pantry with wood shelvingA remodeled laundry and mudroom with a bench, cubbies and painted cabinetsA second-story addition that matches the existing rooflineA galley kitchen opened up to the dining room with a new peninsulaA remodeled family room with new windows and a window seatA wide opening with a new beam where the kitchen wall was removed

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Sawyer in Paradise

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Paradise team

A local vetted partner works across Paradise and the towns around it, to the same written standard as every Sawyer job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 977-0526
Local Service Coverage

Request a Free Estimate in Paradise

Tell us what you need - Sawyer Remodeling Paradise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch