A Sawyer company - serving Paradise, NV
A remodeled primary bathroom with a soaking tub and a walk-in shower
Schluter · Paradise

Schluter Driveway & Pavers in Paradise, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Paradise
A remodeled hall bathroom with patterned floor tile and painted walls
A low-threshold walk-in shower with a bench and grab bar
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A remodeled family room with new windows and a window seat
A wide opening with a new beam where the kitchen wall was removed
A stone counter, tile backsplash and open shelf after a kitchen remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Schluter Driveway & Pavers: The Paradise Owner’s Guide

Schluter driveway and paver edge systems, drainage profiles, and finishing trims are installed at the same time the pavers go down, which is why a failure here usually shows up as a sunken edge, a lifted border course, or a paver that rocks against the driveway slab. A full paver driveway with Schluter-compatible edge restraint and drainage profiles typically runs $7,000 to $18,000 installed in Paradise. Small section repairs, replacement profiles, and re-laid border courses are quoted separate and usually stay well under that.

Call (866) 977-0526

Most Paradise owners find us after the rim paver along their driveway dropped a quarter inch below the field, or after a drainage profile at the garage apron stopped moving water and started pooling it against the foundation. You’ll notice it on a walk out to the mailbox before you’d ever notice it from the car.

Key Takeaways

  • Schluter driveway profiles are installed alongside the pavers, so a failed profile means lifting pavers in that zone, not just swapping a strip.
  • Paradise’s clay-heavy soil and monsoon runoff are the two biggest causes of edge and drainage failure here.
  • We’re an independent service provider, not Schluter, and we install, repair, and re-lay using genuine or quality equivalent parts.
  • Every installation is backed by our 365-Day Done Right Promise, in writing, with a price you approve before work starts.

Which Schluter Models This Applies To

A tile setter installing wall tile in a shower

Schluter’s paver and driveway line covers edge termination profiles, drainage channels, and finishing trims that trim where a paver field meets a driveway slab, a garage apron, a planter wall, or a step nosing. Series names differ by region and by install category, so the fastest way to identify your part is to read the extruded lettering stamped along the profile’s back face or the anodized band on top. That stamp gives you the profile shape and depth, and the depth is what has to match your paver thickness. A profile sized for a 2-inch paver won’t seat a 2-3/8-inch unit without a shim bed, and that shim bed is exactly where profiles in Paradise fail first, especially where the sun bakes the bed dry and the paver sits high.

On the OEM-versus-aftermarket call: genuine Schluter profile is the right choice when your existing border is still Schluter and you want the finish and lead time to match. For re-lays or where a stock finish is out, a quality stainless or heavy-gauge aluminum edge profile from a comparable maker will do the job, and we’ll tell you plainly whether the substitute changes your finished look or your drainage path.

If you’ve mixed Schluter with other brands on an earlier project, KraftMaid, Cambria, and Silestone aren’t part of this work, but we service those lines elsewhere in the same home. On the driveway itself, it’s Schluter profiles plus the paver or concrete system they sit against, and nothing else.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Schluter Driveway & Pavers Is Failing

  • A rim paver dropping below the field course. The profile’s anchor flange has lost its bite in the soil bed, usually from monsoon water softening the subgrade under it. Left alone, that dip becomes a trip hazard at the driveway edge and a place water gathers.
  • Border course lifting in summer heat. Paver edges push against the profile when the bed has absorbed heat all day, and if the profile wasn’t set at the right depth, the top paver wants to push over it. A border that wants to ride up along a Schluter trim points to a depth mismatch, not a bad paver.
  • Water pooling at the garage apron or foundation. The drainage profile has silted up or was set off level, so it can’t move runoff away from the garage wall. In Paradise, this is the symptom owners spot right before the slab starts staining.
  • Visible rust bleed or chalky oxidation on the trim. A profile that was installed against bare soil instead of a proper bed reacts to moisture, and the finish fails long before the paver does. Once the finish goes, the profile stops doing its job of holding the edge course clean and squared.
  • Rocking pavers at the joint, not the paver. When a single paver rocks but its neighbor is solid, the profile underneath has settled. Lifting the paver will show you a bed that’s no longer in contact with the flange.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

An open kitchen and dining area after a remodel

In Paradise, small profile and border repairs typically run $300 to $900 for a single section depending on how many pavers get lifted and reset. A section re-lay with new Schluter-compatible profile and reset pavers falls around $1,200 to $2,500. If the failure has spread to a full driveway border or the drainage run along the apron, expect to be in the $7,000 to $18,000 range as part of a larger paver driveway installation, because the profile only gets right when the bed underneath gets right.

What sets the price in Paradise: how much of the paver field gets lifted to reach the profile, whether the subgrade under the failing zone needs re-compaction and new base aggregate, and whether we’re matching a discontinued profile finish. We give you the price in writing before we touch a paver, itemized by parts and labor, so the number on the invoice is the number you approved. The work is covered by the 365-Day Done Right Promise, and if the repair fails we come back, no argument.

DIY or Call Us?

The safe homeowner check is above ground and no tools needed: walk the driveway and look for any paver that dips below the field or rocks at the joint, trace where water runs to at the garage apron after rain, and check the profile trim for rust bleed. That tells you plenty. What you should not do is pry up and re-bed pavers against a profile yourself, because the profile’s performance depends on the full compaction and depth match, and a half-fixed edge in Paradise’s summer heat settles right back out within a season. That’s not a scare, it’s what we see. We’re an independent service provider, and our technicians have up to 21 years of experience with driveway and paver work.

Call (866) 977-0526 for a free estimate. We’ll tell you straight whether a repair will hold or whether a section re-lay is the honest call.

FAQs

A whole-home remodel with the living, dining and kitchen areas opened up

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A single-story rear room addition with tall windows and a new patioA second-story addition that matches the existing rooflineA small remodeled galley kitchen with cabinets to the ceilingA finished basement family room with a media wall and wet barA walk-in pantry with wood shelvingA remodeled laundry and mudroom with a bench, cubbies and painted cabinets

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Sawyer in Paradise

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Paradise team

A local vetted partner works across Paradise and the towns around it, to the same written standard as every Sawyer job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 977-0526
Local Service Coverage

Request a Free Estimate in Paradise

Tell us what you need - Sawyer Remodeling Paradise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch