







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Fence Installation: The Paradise Owner’s Guide
Boral fence installation in Paradise typically runs $3,500 to $9,000 for a standard residential yard, and the price depends on linear footage, gate count, and how much old fencing comes out first. That’s the installed number, materials and labor together, not a per-panel guess you have to multiply out yourself. Most Paradise owners come to this page after a wind event or a fence-line conversation with a neighbor pushes the project forward.
The symptoms are usually the same story told in different order: a gate that drags the ground, posts that lean after a wet winter, or pickets that cup and split along the sunward face. Boral fiber cement fencing holds up better than cedar in this climate, but it still fails on a schedule, and knowing that schedule is what this page is for.
Key Takeaways
- Installed Boral-compatible fence runs $3,500 – $9,000 in Paradise for most residential jobs.
- Boral fiber cement products resist rot and termites in a way wood can’t, but dirt-to-product contact at the post base is still the number-one failure point.
- We’re an independent service provider, not affiliated with Boral; we install and source to your product line.
- Every project comes with a written price before work starts and our 365-Day Done Right Promise behind the install.
Which Boral Models This Applies To

Boral’s exterior line isn’t one product. Their fiber cement fencing and trim systems show up under a few names depending on region and era, and the panel profiles differ in thickness, embossed wood-grain pattern, and edge treatment. Before we quote anything, we confirm the exact profile on your property by measuring picket width and thickness at an undamaged section, checking the cap rail profile against the post cap, and looking at any mill stamp on the back face. If the original product is out of production, we source the closest current equivalent in the same thickness class and tell you plainly where the profile will read slightly different.
On OEM versus aftermarket: Boral’s own panels give you a true color and texture match if the line is still active, which matters most on a partial repair where new meets old. A quality aftermarket fiber cement in the same thickness will perform nearly identically in Paradise, but the embossed grain won’t match panel-for-panel. For a full fence-line replacement, that mismatch disappears entirely. We quote both paths so you’re comparing real numbers, not a sales pitch.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Fence Installation Is Failing
- Posts leaning or rocking at the ground line. This is almost always water saturating the footing or soil pulling away from the post after monsoon runoff. A Boral panel is durable; the post that holds it is the part that gives first.
- Panels cupping or bowing mid-span. Heat expansion and inadequate framing between posts cause this. If the stringers are spaced too wide, fiber cement panels flex and eventually crack along the fastener line.
- Pickets splitting at the nail or screw. Over-driven fasteners or nails without enough shank create a stress point where the panel splits in a hard wind. This shows up fast on the sun-exposed sides of a Paradise yard.
- Color fading or chalky surface film. UV exposure here is brutal, and fiber cement will chalk without proper sealing. That white residue washes onto the sidewalk and the panel face loses its finish.
- Gaps opening at the cap rail and gate frame. Movement between the post and rail from thermal cycling. If your gate no longer latches cleanly, the frame has shifted, and the hardware is telling you before the panel does.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Fence installation in Paradise lands in that $3,500 – $9,000 band, and here’s what moves you up or down inside it:
| Line Item | Typical Range |
|---|---|
| Boral-compatible fiber cement panels and posts | $1,400 – $3,800 |
| Removal and haul-away of old fence | $400 – $1,200 |
| Post setting, footings, framing | $700 – $1,800 |
| Labor and finish | $1,000 – $2,200 |
Longer runs, multiple gates, corners, and sloped grade all push toward the top of the range. Every quote is a written, line-item price before any work starts, and the number on the invoice is the number you approved. The install carries our 365-Day Done Right Promise.
DIY or Call Us?
You can safely check a few things yourself: confirm the post caps are secure, look for soft spots where the post meets the soil, and measure panel thickness at an undamaged spot so you know what you’re matching. What goes wrong on DIY fence work is the footing and the framing. Setting a post plumb in this soil, at the right depth, with the right concrete mix, is where most owner-installed fences fail inside two years. Cutting fiber cement panels without the right blade throws silica dust, and that’s a genuine health issue, not a scare tactic. If the run is longer than a few panels, or the grade is uneven, it’s a job for a crew. Call (866) 977-0526 for a free estimate.
FAQs

A properly installed fiber cement fence should hold 20 to 30 years in this climate, with the posts and footings being the limiting factor, not the panels themselves. We see posts fail well before the panel material does when the footing is shallow or the soil drains poorly. Call (866) 977-0526 and we’ll assess what’s realistic for your specific run.
Yes, if the failure is localized to a handful of panels or posts and the framing is sound. A partial repair is usually the right call when more than 70 percent of the line is still solid and the product profile is still available. An exact quote comes from an on-site look. Call (866) 977-0526 to schedule it.
A standard residential fence replacement in Paradise is typically a two to four day job for a crew, depending on footage and how much removal is involved. Longer runs with multiple gates stretch toward five days. We confirm the timeline in writing before we start, along with a live arrival time on the day.
We identify the profile from the panel thickness, embossed grain pattern, and any mill stamp, then either source the current Boral equivalent or the closest aftermarket match in the same class. We tell you up front where a color or grain will read differently on a partial repair. Call (866) 977-0526 for a free estimate and a sourcing plan.
Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.
Ready for a written price before any work begins? Call (866) 977-0526 to schedule your free estimate. We also work with KraftMaid, Cambria, and Silestone on projects across the home, and every job comes with a live arrival time, photo updates, and our 365-Day Done Right Promise behind it.












