







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Fence Installation: The Paradise Owner’s Guide
CGI-compatible fence installation in Paradise typically runs $3500 – $9000 installed, and the work is usually scheduled rather than same-day, since a full fence build needs a site check, material order, and permit clearance before anyone sets a post. Owners usually find out something is wrong all at once: a gate that swings loose after a windy spring, panels that lean toward the wash, or a post that rocks in dry soil after a summer of 100-degree days. In Paradise, the call almost always follows the first monsoon gust or a hard freeze that heaves a footer.
Key Takeaways
- Installed CGI fence work in Paradise runs $3500 – $9000 depending on linear footage, material, and gate count.
- We’re an independent service provider, not affiliated with CGI. We install and repair CGI-compatible fencing.
- Written price before any work starts, photo updates before and after, and a 365-Day Done Right Promise on the install.
- Our technicians have up to 21 years of experience with fence and gate systems.
Which CGI Models This Applies To

CGI is a fence and gate fabricator, so the “model” that matters is the system on your property: the panel style, the post spacing, and the gate frame your CGI unit was built around. Common residential lines in Paradise fall into welded-wire panel systems, ornamental aluminum look-alikes, and framed gate kits, and the sizing differences between them are where owners get burned. A 6-foot panel from one CGI line will not drop into posts cut for a 5-foot line without new hardware, and gate frames built for a 48-inch opening won’t square up in a 50-inch gap.
Identify what you have before you price anything. Read the label stamped on the post cap or gate hinge bracket, then measure post center-to-center (not edge-to-edge) and the actual gate opening. Those two numbers settle most compatibility questions. On the OEM-versus-aftermarket call for CGI: an OEM panel or gate frame guarantees a fit and keeps your line’s finish consistent, while a quality aftermarket equivalent can save real money on a repair where the frame is sound and only hardware failed. We don’t stock parts and we don’t carry a parts inventory on a truck; we source to your measurements and order what the job needs.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Fence Installation Is Failing
Here’s what a failing CGI fence looks like in Paradise specifically, and what’s actually going on underneath:
- Posts rocking in the soil. Paradise’s caliche-heavy ground and dry winters shrink away from footers, so a shallow set will loosen. A post that moves by hand has lost its footing, not just its cap.
- Panels leaning or racking out of square. Usually a failed post or a stretched fastener line. Once one panel leans, the wind load shifts to its neighbors and the whole run follows.
- Gate sagging and dragging. Almost always hinge wear or a gate frame that was undersized for the opening. A CGI gate built for a lighter panel will sag when it’s hung on a heavier gate leaf.
- Rust bleeding at welds and hardware. Our monsoon humidity plus dust finds every untreated weld. Surface rust on a hinge is cosmetic; rust weeping from a structural weld means the coating failed early.
- Loose or missing fasteners along the rail. Vibration from wind and gate slam backs out self-tapping screws. It looks minor until a panel drops a rail in a gust.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed CGI-compatible fence work in Paradise lands in the $3500 – $9000 range for this page’s lead scope. What moves the number: linear footage, panel or system style, gate count and gate hardware, and whether old fence comes out and goes to the dump. A single gate rebuild or a short run of replacement panels sits at the low end; a full perimeter with two gates and haul-away sits at the top.
| Line item | Typical Paradise range |
|---|---|
| Full CGI-compatible fence install (lead scope) | $3500 – $9000 |
| Panel replacement, short run | Low end of range |
| Gate rebuild with new hardware | Mid range |
| Old fence removal and haul-away | Adds to the top of the range |
Parts and labor are quoted separately so you can see what the hardware costs versus the install. The written price lands before any work starts, and the 365-Day Done Right Promise covers the install for a full year. Material partnerships across our work include KraftMaid, Cambria, and Silestone on interior projects, though fence work is sourced to the CGI system on your property.
DIY or Call Us?
What you can safely do yourself: read the label, measure post spacing and gate opening, photograph the failed hardware, and note where the fence leans. That information makes the quote accurate and saves a return trip. What goes wrong with DIY here is the footing and the structure. Setting posts in Paradise caliche without the right depth and base means the fence loosens again by the next dry season, and a gate frame rehung out of square will drag within months. Fence panels are heavy and gates swing under load, so a two-person job done wrong is a real injury risk plus a wasted weekend. Most owners get further by handing us the measurements and letting the install and the guarantee carry the risk. Call (866) 977-0526 and we’ll get a written price to you before anything starts.
FAQs

A properly installed CGI-compatible fence in Paradise typically holds 15 to 20 years, though coated steel hardware often needs attention sooner because of monsoon humidity and dust. Footing quality and post depth matter more than the panel itself out here. Call (866) 977-0526 for an exact quote, free estimates.
Often yes, if the posts and frame are sound and only hardware, fasteners, or a single panel failed. A sagging gate or one leaning run is usually a repair; a fence with multiple rocking posts is a replacement. Call (866) 977-0526 to schedule a free estimate.
A single gate or short panel run is typically a one-day job; a full perimeter install usually takes a few days depending on footage and gate count. We confirm timing in the written quote. Call (866) 977-0526 for a written price before work starts.
We source to your measurements and the label or model number on your CGI system, then order the panel, gate frame, or hardware to fit. We don’t stock parts or carry them on a truck, so we measure first and order what the job requires. Call (866) 977-0526 for a free estimate.
Call (866) 977-0526 to schedule your free estimate. You’ll get a written price before work starts, photo updates before and after, and a live arrival time so you’re not stuck waiting on a four-hour window. Every job runs under The Relay Visibility Guarantee, backed by the 365-Day Done Right Promise.
Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.












