







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Driveway & Pavers: The Paradise Owner’s Guide
CGI-compatible paver driveways and paver patios installed in Paradise typically run $7,000 – $18,000 for a driveway and $3,500 – $11,000 for a patio. Paver work is scheduled, not same-day – a driveway or patio install books in advance because base prep, compaction and cure time can’t be rushed. We install CGI-compatible driveway and paver systems, and we inspect, repair and replace failed sections.
Owners usually discover the failure long before they call. A section of pavers starts rocking when you walk on it. Sand joints wash out. Two or three units sink a half-inch below the rest and every tire hits them on the way in. Then the crack: one paver snaps across the middle, or the edge course drifts into the street after a hard rain. In Paradise, that pattern almost always traces back to a base problem, not a bad paver. The slab or aggregate base under the sand is what carries your truck, and once it settles or washes out, the surface pavers are just following it down.
Which CGI Models This Applies To

CGI is the name most Paradise homeowners see on paver and hardscape product literature, and the model line matters when you’re matching a replacement. The first thing to check is the actual unit, not the paperwork: pull a loose paver (or flip one on edge) and look for the stamp on the back face. CGI pavers carry the manufacturer mark and usually a product name – a series number, a style name, sometimes a thickness callout. Write down exactly what you see, then measure the paver’s face: length, width and thickness in millimeters. Thickness is the number that gets people in trouble. A 60mm paver and an 80mm paver look identical from above and are not interchangeable in a driveway that takes vehicle loads.
Once you have the stamp and the measurements, the OEM-versus-aftermarket decision is straightforward. A true OEM match is the safest route if you’re replacing a handful of units inside an existing field, because the color, texture, chamfer and dimensions line up with what’s already down. Quality aftermarket equivalents are a real option – many come from the same production lines – but they need to match on three specs, not two: face dimensions, thickness, and the color/format family. Get the thickness wrong and you get a trip edge. Get the color lot wrong and the repaired section reads as a patch from the sidewalk. Our technicians have up to 21 years of experience matching hardscape units to existing fields in Paradise, and we’ll tell you honestly when a field is too weathered for a clean match.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Driveway & Pavers Is Failing
- Rocking or wobbly pavers. The sand bedding under the unit has washed out or the base aggregate has settled, so the paver is now sitting on a void. In Paradise this shows up first along the driveway apron, where irrigation runoff and street drainage meet.
- Joint sand washing out. Polymer or regular joint sand doesn’t just disappear – it’s carried off by water. If you’re re-sanding the same 10 feet every season, water is running through the field, not off it.
- Settlement in a low spot or over a utility trench. A dip that follows a straight line across the driveway is a fill-compaction problem. A dip in a random bowl shape is usually a drainage problem. Both read as “bad pavers” and neither one is fixed by swapping pavers.
- Cracked or spalled units. Surface flaking on a paver can come from freeze-thaw, but in the Paradise climate it’s more often load stress on an unsupported unit or a paver that was already chipped when it went down. One cracked unit in a stable field is a candidate for a swap; a cluster of cracks means the base is done.
- Edge course migration. The border pavers push outward and the field opens up behind them. That’s a failed edge restraint – the hidden vertical piece that locks the whole field in place. Once the restraint fails, the field spreads season by season.
Replacement Cost & What’s Included

Here’s what CGI-compatible driveway and paver work runs in Paradise:
| Work | Installed price range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway replacement (full tear-out and rebuild) | $5,000 – $14,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway sealing | $250 – $700 |
What moves the number: square footage first, then base depth, then access. A driveway that needs 6 inches of compacted aggregate base costs more than one that can use 4, and a side yard you can’t get a plate compactor into costs more than an open front yard. Haul-away of old pavers and concrete is a real line item in Paradise, so we show it separately.
You get a written price before any work starts – parts, labor, base materials and disposal each on their own line. If the base turns out deeper than the quote assumed, we stop and show you photos before the number changes. The 365-Day Done Right Promise covers the work for a full year, and every repair carries a written guarantee.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely handle the inspection yourself. Pull one loose paver, read the stamp on the back, measure the face dimensions and thickness, photograph the failing area from a few angles, and check whether water is pooling toward the house or draining away. That’s information we need anyway, and it saves a trip.
Where DIY goes wrong on pavers is the base. Setting new units on top of a settled base, or replacing pavers without fixing the compaction and edge restraint underneath, gets you a repair that fails in one or two rainy seasons. The other trap is plate-compacting a field that has utilities or irrigation lines under it, which is how people crack a line they didn’t know was there. Pavers don’t need a specialist to carry, but they do need a proper base, and a base done wrong is invisible until the surface fails again.
If you’d rather hand it to a crew, call (866) 977-0526. We’ll give you a written price before anything starts, and you’ll know exactly who’s coming and when.
FAQs

A CGI paver installed over a properly compacted and restrained base should hold up in Paradise conditions for many years, and the units themselves often outlast the base. The realistic number is the base, not the paver: a driveway with a shallow base and a weak edge restraint can settle inside 5 to 8 years, while a well-built one can go much longer. Call (866) 977-0526 for an inspection and a written quote – estimates are free.
Yes, and it’s often the right call – a single cracked unit or a small settled cluster can usually be lifted, re-based and relaid without touching the rest of the field. Repair stops being the right answer when the settlement follows a long trench line, when the edge restraint is gone, or when more than a small percentage of the field is rocking. We’ll tell you which one you’re looking at before you spend anything. Call (866) 977-0526 for a free estimate.
A small paver repair is typically a one-day job, sometimes two if the base needs rebuilding, and a full driveway or patio install takes several days because of excavation, base compaction, laying and joint sand cure. Time gets longer when old concrete has to come out and be hauled away, which is common on Paradise driveways. Call (866) 977-0526 and we’ll give you a written schedule with the price.
We start from the stamp and the measurements, not from a catalog photo. You give us the manufacturer mark from the back of a paver plus the face dimensions and thickness, and we source the exact OEM unit where it’s available or a quality aftermarket equivalent that matches on dimensions, thickness and color family. We don’t carry parts on a truck, so the unit comes from the supplier to the job – we just order it correctly the first time. Call (866) 977-0526 for a free estimate.
Contact Sawyer Remodeling Paradise
If your CGI driveway or pavers are rocking, settling or cracking, call (866) 977-0526 for a free estimate. We’re an independent service provider and not affiliated with CGI, so we work solely for you – and we’re happy to service your hardscape alongside kitchen and bath projects that use KraftMaid, Cambria or Silestone materials. You get a written price before work starts, background-checked uniformed technicians on every job, live arrival tracking, and photo updates before and after. The 365-Day Done Right Promise backs the work for a full year.
Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.












