







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Home Additions & ADU: The Paradise Owner’s Guide
We build Jerith-compatible home additions and ADUs for Paradise homeowners, with typical installed projects running $45,000 – $130,000 for an addition and $90,000 – $220,000 for a detached or attached ADU. This isn’t a fast-turnaround parts swap; a permitted addition in Paradise is a scheduled project, and we’ll give you a written price before any work starts. The failing-component picture is usually how owners find us: a sunroom panel that’s gone cloudy or brittle, a screen wall pulling loose from its track at the base, or an enclosure frame that’s shifted on its footings after a monsoon season. If you’re standing next to a Jerith structure that’s sagging, leaking at the seams, or missing panels, that’s the call.
Which Jerith Models This Applies To

Jerith builds its screen and enclosure systems around specific post profiles and panel sizes, and home additions and ADU projects that incorporate a Jerith enclosure line usually dovetail with the manufacturer’s standard modular sections. The compatibility gotcha owners run into most: post wall thickness and reveal depth differ between the heavier residential series and the economy lines, so a replacement post cap or screen spline sized for one series won’t seat in the other. Before you buy anything, find the model plate or sticker on the enclosure frame – Jerith stamps it on the inside face of a corner post or on the header – and photograph it along with a tape measure against the post width and panel opening.
From there, the OEM-versus-aftermarket call is straightforward. For structural parts (posts, headers, footings, connectors) we source OEM or a spec-equivalent built to the same dimensions, because those parts carry load and a mismatch becomes a permit and inspection problem. For wear items like screen, spline, and trim caps, a quality aftermarket equivalent is usually the smarter buy: it’s the same gauge and finish, it costs less, and it wears the same in Paradise’s sun. We’re an independent service provider, not affiliated with Jerith, so we order to the part number you give us rather than guessing from a photo.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Home Additions & ADU Is Failing
- Posts leaning or footings heaved. Paradise’s expansive desert soils and seasonal moisture swings move concrete footings, so a post that was plumb at install can shift a few degrees. Once two posts are out of plumb, the header racks and panels start binding.
- Screen sagging out of the spline channel. UV exposure degrades spline rubber over roughly 8 – 12 years in southern Nevada sun, and once it loses grip the screen bellies and tears. This is a wear item, not a structural failure.
- Cloudy or brittle panels. Polycarbonate and acrylic glazing yellows and turns brittle under Paradise’s summer UV load and can crack from a single hail hit. Chalky, hazy panels have reached end of life even if they’re still in the frame.
- Water intrusion at seams and the base. Failed sealant and roof-to-wall flashing let monsoon rain in, and stains on the interior siding or a damp base track point to a flashing problem, not just caulk.
- Rattling or loose connectors. Loose brackets and corroded fasteners let the whole assembly flex in wind, and flexing is what opens gaps that let water and pests in. Fastener corrosion on a coastal-grade install in a dry climate usually means the wrong fastener was used.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Paradise, a focused repair or partial rebuild of a Jerith enclosure section typically lands in the low thousands, while a full home addition runs $45,000 – $130,000 and an ADU runs $90,000 – $220,000 installed. What drives the range on an addition: foundation and footing scope, whether an existing Jerith enclosure is being integrated or replaced, glazing choice (screen versus insulated panels), and permit and inspection fees for Clark County. We give you a written, line-item price before any work starts – parts and labor broken out – so the number on the invoice is the number you approved. Every job also carries the 365-Day Done Right Promise: if something isn’t done right, we make it right, backed in writing.
DIY or Call Us?
Some checks are safe to do yourself. You can find the model plate, measure post width and panel openings, and photograph any cracking or water staining. Replacing a screen panel or a trim cap is within reach for a careful homeowner.
What we’d steer you away from is anything load-bearing or tied to the structure: re-setting posts, re-flashing a roof-to-wall junction, or rebuilding a header. Those affect the enclosure’s structural integrity and, on a permitted addition or ADU, the inspection record – a DIY repair there can cost you more at the final walkthrough than a proper fix would have. When in doubt, that’s our cue. Call (866) 977-0526 and we’ll confirm which part you need for your Jerith structure in Paradise and quote it plainly.
FAQs

How long does a Jerith enclosure last in Paradise?
A well-installed Jerith screen and enclosure system typically holds up 15 – 25 years, with the structural posts and frame outlasting the wear items. Screen and spline need replacement every 8 – 12 years in Paradise’s UV and heat, and exposed polycarbonate panels usually need swapping sooner than the frame does. Call (866) 977-0526 for an exact assessment – estimates are free.
Can my failing Jerith part be repaired instead of replaced?
Often yes. A sagging screen, a cracked panel, or a failed sealant joint is a repair, not a rebuild. A post that’s heaved or a header that’s racked is usually a replace-and-reinforce job, and we’ll tell you which one you’re looking at before quoting. Call (866) 977-0526 for a free estimate on either path.
How long does the swap take?
A screen or glazing panel swap is usually a single visit. A section rebuild takes a few days, and a full addition or ADU is a scheduled, permitted project measured in weeks to months, not days. We confirm the timeline in writing with your price. Call (866) 977-0526 to schedule your free estimate.
How do you source the right Jerith part for my model?
We work from the model plate on your frame and the measurements you provide, then order OEM or a dimensionally matched equivalent. We’re an independent service provider and not affiliated with Jerith, so we verify fit against the part number rather than guessing. Call (866) 977-0526 and we’ll walk you through what to measure.
Beyond Jerith, we also install and match KraftMaid, Cambria, and Silestone selections on the renovation side of a project, so a home addition in Paradise comes together under one written price and one point of contact. Call (866) 977-0526 to schedule your free estimate with Sawyer Remodeling Paradise.
Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.












