







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Home Additions & ADU: The Paradise Owner’s Guide
We build and finish Unilock-compatible home additions and ADUs in Paradise, and whole-project pricing runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a detached or attached ADU. If you already own a Unilock product and a component has failed, an exact quote takes one call and the written price lands before any work starts.
Most Paradise owners don’t discover the failure all at once. It shows up as a note on the counter from a neighbor, a fresh vertical crack that wasn’t there last spring, or an electrician who won’t sign off until a fitting is swapped. We’re an independent service provider and not affiliated with Unilock, so we look at what’s actually in front of us and tell you straight whether it can be repaired or needs a replacement.
Key Takeaways
- Unilock parts are matched by series and dimension, not by guesswork. A photo and a measurement settle it fast.
- Paradise’s freeze-thaw swings and summer heat strain joints, connectors, and finishes harder than coastal climates do.
- Written price before work starts, and the 365-Day Done Right Promise covers the install for a full year.
- If it’s not done right, we make it right. That’s in writing on every job, not something you request.
Which Unilock Models This Applies To

We work across the Unilock lines common to Paradise additions and ADUs. The homeowner usually has the model somewhere: a stub on the original order, a label inside a cabinet door, a stamp on a connector, or a spec sheet folded into the permit packet. If the original paperwork is gone, a tape measure answers most of it. Series dimensions and mounting patterns change a little between production runs, so the measurement you take today is the one we build from.
Where owners go wrong is assuming every Unilock part is interchangeable across model years. It usually isn’t. A connector that fits one series can sit a few millimeters off on a later one, which is enough to mean it won’t seat or seal. Give us the series name, the width and depth of the opening, and a clear photo of the label, and we can confirm the match before anyone schedules a visit.
On OEM versus aftermarket: for Unilock specifically, OEM is the safer call on structural connectors and anything load-bearing. For cosmetic trim or standard hardware, a quality aftermarket equivalent from a manufacturer-backed supplier does the same job for less. We’ll tell you which is which and price both, so the decision is yours. Plainly put, we don’t claim to stock Unilock parts and nothing rides on a truck – the part gets sourced to the right spec for your model, then installed.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Home Additions & ADU Is Failing
The symptoms below are the ones we see most in Paradise, and each points somewhere specific. Knowing the cause tells you whether it’s a five-minute check or a part that needs swapping.
- A hairline crack that widens each spring. This is usually freeze-thaw movement working a joint or fitting apart, not a cosmetic scuff. Left alone, water finds the gap and the problem grows with the next temperature swing.
- A connector or seam that’s gone loose. Loose hardware on a Unilock assembly means the mount points have shifted or the fitting has worn. It rarely tightens back to solid, which is why owners call us after trying.
- Water seeping at the base or along a joint. Standing water after a storm points to a failed seal or a part that’s moved out of alignment. In Paradise’s summer monsoon months, that seeping does its quiet damage before you see it inside.
- A finish that’s peeling, chalking, or blistering. Our sun and heat punish exterior finishes. When a coating gives up, the material underneath is unprotected and starts to degrade faster than the finish alone would suggest.
- A part that just won’t sit flush anymore. The assembly has settled, or a component has warped from heat cycling. This is the one owners most often try to shim themselves, and the one that often needs the right replacement instead.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the honest number for Paradise: a home addition runs $45,000 – $130,000 and an ADU runs $90,000 – $220,000. If your situation is a single failed component rather than a full build, the quote lands well under that, and we’ll tell you the moment that’s the case. What moves the range is scope – square footage, foundation work, whether the ADU is detached or attached, and how much of the existing structure gets tied into the new.
A garage conversion sits between the two at $30,000 – $80,000, which is often the smart route if you’re working with a Unilock assembly already on the property and want to convert it rather than start from scratch.
- Written, line-item price before any tool is picked up. The number on the invoice is the number you approved.
- Material sourcing to your model spec, OEM or quality aftermarket, priced both ways so you choose.
- Installation by background-checked, uniformed technicians. You know who’s arriving before they’re on the driveway.
- The 365-Day Done Right Promise, in writing. A free second visit if the work fails within the year, covered with no argument.
That’s The Relay Visibility Guarantee at work: a live arrival time, photo updates before and after, and the written price in your hands before work begins. Calls are answered by a live person, 24/7, so you’re not chasing a callback.
DIY or Call Us?
Safe to check yourself: read the model label, take three measurements (width, depth, and mounting spread), photograph the part from two angles, and clear loose debris so we can see the actual failure. That’s it. Those four steps speed up your quote more than any other five minutes you’ll spend.
Where DIY goes wrong is at the install: fitting a replacement connector or re-seating a load-bearing component. Get that wrong and you’re masking movement instead of fixing it, and the next storm finds it. On anything that carries weight or seals water, a trained professional takes it. We’ll price a repair instead where one is the honest answer – no upselling a full build when a part swap gets the job done.
Call (866) 977-0526 for a free estimate. Estimates are free, and the written price comes before anything starts.
FAQs

In our climate, expect noticeably shorter service life than the manufacturer’s spec sheet suggests, because heat cycling and freeze-thaw work on joints and finishes year after year. Structural parts typically hold longer than exterior finishes; the finish usually gives first. A quick annual inspection catches the failure while it’s still cheap to fix.
Sometimes, yes – a seal or a cosmetic finish often gets repaired for a fraction of a swap. Load-bearing connectors that have shifted usually need replacement, not repair. We’ll give you the honest verdict before quoting either.
A single-component swap is typically a short visit; a section-level replacement or tie-in to a new addition runs longer. We confirm the schedule in writing with your price, along with the live arrival time the morning of. Call (866) 977-0526 for the exact timeline on your model.
By series and exact dimension, not by guesswork. You give us the model label and measurements, we confirm the part against your spec, and we price OEM alongside a quality aftermarket equivalent where one exists. Same approach on the other brands we also service – KraftMaid, Cambria, and Silestone – matched to spec and installed once.
Call (866) 977-0526 to schedule your free estimate. We’ll confirm your Unilock model, tell you repair or replace, and hand you a written price before a single tool moves.
Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.












