A Sawyer company - serving Paradise, NV
A new rear addition with a vaulted beamed ceiling and tall windows
Boxabl · Paradise

Boxabl Home Additions & ADU in Paradise, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Paradise
A finished backyard cottage with a small covered porch
A single-story rear room addition with tall windows and a new patio
A freestanding soaking tub in a remodeled primary bathroom
A whole-home remodel with the living, dining and kitchen areas opened up
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A stone counter, tile backsplash and open shelf after a kitchen remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boxabl Home Additions & ADU: The Paradise Owner’s Guide

A Boxabl-compatible home addition or ADU in Paradise typically runs $45,000 – $130,000 installed, depending on whether you’re tying into the existing module’s utility stub-outs or building a full detached unit. We’re an independent service provider, not affiliated with Boxabl, and we handle the site work, foundation interface, and connections that a factory module can’t do on its own. Most Paradise owners don’t discover this part of the job has gone sideways until they notice a gap between the Boxabl module and the addition’s tie-in wall, water pooling at the foundation seam, or a utility connection that wasn’t capped to spec. Our technicians have up to 21 years of experience with modular interfaces, and we put the price in writing before we touch anything.

Call (866) 977-0526

Which Boxabl Models This Applies To

A garage converted into a guest room and home office

The Casita is the module most Paradise owners are expanding, and its wall panels, floor cassette heights, and utility stub-out locations are the specs your addition has to meet. Identify your module’s generation by the serial plate near the entry frame, then measure the panel-to-panel spacing at the tie-in wall, because the earlier and later Casita builds differ in how the exterior panels seat against an addition. Getting this wrong is the most common compatibility gotcha we see: an addition framed to the wrong panel depth leaves a gap that no amount of caulk will close.

On the OEM-versus-aftermarket question, there’s no real choice for the structural tie-in hardware, foundation anchors, and utility connectors. Those need to match the module’s load path and the manufacturer’s spec. Where you do have latitude is finish and fixture work, and that’s where we bring in KraftMaid cabinetry, Cambria and Silestone surfaces, and standard plumbing and electrical components that meet code without carrying a premium. We don’t stock parts or carry them on a truck, so every component is sourced to your module’s serial number and confirmed before we schedule the install.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boxabl Home Additions & ADU Is Failing

  • Visible gap at the tie-in wall. The addition has shifted or settled away from the module, usually because the foundation interface wasn’t anchored to the same load path. Left alone, that gap lets in desert dust and monsoon rain.
  • Water pooling at the foundation seam. Paradise sits on soil that swells and shrinks with the seasons, and a poorly graded addition apron pushes runoff straight at the module’s base. That’s a drainage failure, not a cosmetic one.
  • Utility connections that weren’t capped to spec. An uncapped or mismatched stub-out for water, gas, or electrical is the failure we flag first. It’s the one that can be genuinely dangerous, and it needs a licensed trade, not a weekend fix.
  • Doors and windows racking out of square. When the addition and module settle at different rates, openings stop latching cleanly. That’s an early signal that the structural tie-in needs review.
  • Roof-to-module flashing lifting. Our wind and UV load works flashing seams hard, and a lifted edge is where the first leak starts.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A room opened to the studs with new wiring and plumbing

For Paradise, a Boxabl-compatible home addition runs $45,000 – $130,000 installed. A detached ADU built to match your module is $90,000 – $220,000, and a garage conversion into finished living space is $30,000 – $80,000. What moves you up the range: whether the addition shares a foundation or sits detached, how far the utility runs have to travel, whether the roofline has to match the module’s profile, and how much finish work you want on the interior.

Every quote is line-item and in writing before work starts, so the number on the invoice is the number you approved. The install carries the 365-Day Done Right Promise: if it’s not done right, we make it right, in writing. No change orders dropped on you at the end.

DIY or Call Us?

You can safely check a few things yourself: measure the gap at the tie-in wall, look for water staining at the foundation seam, and confirm your module’s serial plate matches what’s on your paperwork. What you shouldn’t touch is the utility connections or the structural anchoring. A mismatched gas or electrical stub-out on a Boxabl addition in Paradise is a real hazard, and the anchoring has to be engineered to the module’s load path. This is where DIY goes wrong, and it’s the one place we’ll always tell you to stop. For the rest, call (866) 977-0526 and we’ll give you a written price range before anyone picks up a tool. Estimates are free.

FAQs

A framer checking new wall framing on a home addition

How long does a Boxabl-compatible addition or ADU last in Paradise? A properly anchored and flashed addition should hold up for decades, but our sun, wind, and swelling soil put the foundation interface and roof flashing under real stress, so those are the two spots to inspect yearly. Call (866) 977-0526 for an exact quote on bringing yours up to spec – estimates are free.

Can a failing tie-in be repaired instead of replaced? Often yes. A lifted flashing seam, a regraded apron, or a re-capped stub-out is a repair, not a rebuild, and that’s usually the cheaper call. If the structural anchoring is compromised, though, it’s a re-anchor, and we’ll tell you which you’re looking at in writing.

How long does the swap or install take? A repair to the tie-in or flashing is typically a day or two. A full addition runs weeks, and an ADU longer, because the site work, foundation, and utility connections set the timeline. We confirm the schedule in writing before work starts.

How do you source the part? We match every structural and utility component to your module’s serial number and the manufacturer’s spec, then confirm it before we schedule. We don’t stock parts or carry them on a truck, so nothing gets installed that wasn’t sourced for your specific Casita.

Call Sawyer Remodeling Paradise at (866) 977-0526 to schedule your free estimate on a Boxabl-compatible addition or ADU in Paradise. You’ll get a written price before any work starts, a live arrival time, and photo updates before and after – part of The Relay Visibility Guarantee on every job. We also work with KraftMaid, Cambria, and Silestone when the finish work calls for it.

Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A powder room with botanical wallpaper and a stone sinkA remodeled laundry and mudroom with a bench, cubbies and painted cabinetsA built-in window seat in a bay windowA dining nook with a built-in banquetteA home office with a built-in desk and shelvesA remodeled kitchen with a waterfall island and wood cabinets

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Sawyer in Paradise

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Paradise team

A local vetted partner works across Paradise and the towns around it, to the same written standard as every Sawyer job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 977-0526
Local Service Coverage

Request a Free Estimate in Paradise

Tell us what you need - Sawyer Remodeling Paradise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch