







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
James Hardie Kitchen Remodeling: The Paradise Owner’s Guide
James Hardie kitchen remodeling in Paradise typically runs $14,000 – $45,000 installed, with a small kitchen remodel landing between $9,000 and $20,000 and cabinet-only work from $4,000 to $13,000. We’re an independent service provider, not affiliated with James Hardie, and we quote the written range before any demolition starts. Paradise owners usually call us after they’ve priced a remodel and then hit the wall: a bid that changes at the door, a call that never gets returned, or fiber cement trim around a kitchen window that’s swelling and chalky where it meets the stucco after a rainy winter. That tired trim is often what pushes a stalled kitchen project back onto the table.
Which James Hardie Models This Applies To

“James Hardie kitchen” isn’t one product. HardiePlank lap siding (Select Cedarmill or Smooth), HardiePanel vertical siding, and HardieTrim and HardieSoffit boards are the products that actually touch a kitchen remodel – typically the exterior wall behind a garden window, the trim around a sliding door, or a short bump-out where the kitchen got pushed into the yard. The kitchen itself is cabinetry and countertop, which is where KraftMaid, Cambria, and Silestone come in.
Identify your product before we spec the job. Look for a stamp on the back of any board or a label on the original bundle. HardiePlank Select Cedarmill runs a 5/16-inch (about 8mm) thick profile in 6-1/4 and 8-1/4-inch widths; HardiePanel comes 4×8 feet. That thickness matters because Hardie replaced its old Thin 3/16-inch and 1/4-inch products – if your trim is that thin, you’re matching discontinued stock, and the modern replacement is a different thickness behind the same window box.
When a piece fails, you’re choosing between OEM Hardie stock (exact color, exact profile, factory finish) and a quality aftermarket fiber cement (cheaper, but the butt joints and the caulk line show). For anything visible from the street we spec OEM. For a section buried under a ledger board, aftermarket is a fair call. We tell you which before you approve the written price.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your James Hardie Kitchen Remodeling Is Failing
Fiber cement is tough, but a kitchen window wall in Paradise takes real punishment – sun on the south face, wind-driven rain, and sprinkler spray off the lawn. Here’s what failure looks like before it becomes a repair:
- Chalking and fading on the sun-facing trim. Hardie’s finish will chalk under sustained UV – that white powder washing down the stucco is normal aging, not rot, but it tells you the coating is near the end of its service life.
- Swelling or soft spots at the bottom edges. Fiber cement absorbs moisture if the factory paint film breaks or the end grain sits unpainted against a sill. Once the board goes soft, it can’t be re-painted back to life.
- Caulk lines opening at the window and stucco joint. A 1/8-inch gap that reappears every fall means the board is moving with temperature, not that the caulk is bad. This is where water gets behind the wall.
- Fastener rust bleed at the nail heads. Staining around nails points to moisture behind the board, and it means the original nailing pattern or the house wrap under it needs a look.
- Chipped or peeling factory finish at a corner or butt joint. This is the smallest problem on the list and the easiest to catch early – a spot touch-up before winter keeps it from becoming a rebuild.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A full James Hardie kitchen remodel in Paradise runs $14,000 – $45,000. A small kitchen remodel lands at $9,000 – $20,000. Broken out: cabinet installation $4,000 – $13,000, countertop installation $2,000 – $6,500, backsplash $800 – $2,500, and a kitchen island $3,000 – $10,000. Exterior Hardie repair on the same wall is quoted as a line item, not bundled into a number you can’t see.
What drives the range: cabinet box quality and linear footage, countertop material (Cambria and Caesarstone price above entry quartz), whether the wall behind the window needs sheathing repair, and how much of the exterior Hardie has to come off to do the job right. Every quote is itemized – labor, materials, and the brand and series we’re installing. The 365-Day Done Right Promise rides on the finished work for a full year after we close.
DIY or Call Us?
You can safely check some of this yourself: look for the product stamp, measure the board thickness, probe a soft spot with a screwdriver, and photograph any gap at the window joint. What you shouldn’t take on is the replacement itself. Cutting and hanging fiber cement means working off a ladder or scaffold, cutting a silica-bearing material, and re-flashing a window opening so water sheds correctly – get the flashing wrong and you’ve traded a $900 repair for a wall rebuild. The board has to be back-primed, painted on all six faces (including the end grain), and nailed on the correct pattern for the profile. That’s not a homeowner afternoon. Get a free written estimate first, then decide. Call (866) 977-0526 and we’ll send the number in writing before anything gets touched.
FAQs

Hardie advertises a 30-year limited finish warranty on primed and painted product, and in practice the board holds up well here – but the finish is what fails first under Paradise sun, not the cement. Expect to repaint sun-facing trim on a shorter cycle than the warranty suggests, and inspect the caulk at the window joint every fall.
Often yes. Small chips, one opening caulk line, or chalky paint can be spot-prepped and repainted rather than torn out – that’s the cheap call. The board has to come off when it’s soft at the edge, when rust bleeding shows water is behind it, or when a butt joint keeps opening. We tell you which one you have in the written estimate. Call (866) 977-0526 for an exact quote – estimates are free.
A single window-wall trim replacement is typically a one-day job. A full Hardie section with flashing repair runs two to three days, and a whole kitchen remodel with exterior work at the same time is weeks, not days. You get the schedule in writing with the price, so there’s no guessing.
We match your exact Hardie product line and profile through supplier channels that carry current factory stock. We don’t stock parts or carry them on a truck – the material is ordered to the spec we write into your estimate, with the brand and series named on the paper. If the exact profile is discontinued, we tell you before you approve the substitute.
Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.












