







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Bathroom Remodeling: The Paradise Owner’s Guide
Ameristar-compatible bathroom remodeling in Paradise typically runs $9,000 – $28,000 installed, and we quote the full scope in writing before any work starts. Small bathroom projects land closer to $5,000 – $12,000, while full gut renovations with layout changes sit at the top of the range. Most Paradise homeowners discover a failure the same way: a vanity drawer that drags or pops off its slide, a shower valve that drips after the first winter, or caulk lines that open up along the tub surround. This guide covers what fails, what a real replacement costs, and how we source American-made bath components built to handle the Mojave climate.
Which Ameristar Models This Applies To

Ameristar manufactures bathroom vanities and cabinetry loaded with soft-close slides and hinges, and its lines are sold through big-box stores and builder supply channels. In Paradise we most often see the Ameristar Arlington and Kenwood vanity collections, both of which use stock box sizes (30″, 36″, 48″, 60″) with undermount sink cutouts pre-machined. The compatibility gotcha: Ameristar door hinges on the 2018-and-later Arlington line sit on a 35mm European cup pattern, while earlier versions used a 26mm pattern – so walking into a store and grabbing “Ameristar hinges” will burn you if you don’t measure first. Check the sticker inside the cabinet door, photograph it, and measure your hinge cup diameter before ordering anything.
On the parts question, OEM Ameristar replacements are the safe match for anything structural – drawer boxes, hinge cups, toe-kick panels. Aftermarket equivalents from brands like Blum or Salice work well for hinges and slides but not for custom-machined vanity tops. We’re an independent contractor and not affiliated with Ameristar – we source Ameristar parts through licensed suppliers and quote the exact part number in writing before we order.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Bathroom Remodeling Is Failing
- Vanity drawers that stick or pop off the slide. Ameristar soft-close slides wear out around 8-10 years in a dry climate, and the plastic tab that holds the drawer on the rail cracks first.
- Cabinet doors that sag or won’t stay closed. Usually a worn hinge cup or a door that swelled from humidity swings out of the Paradise summer and sticks the following spring.
- Caulk lines opening at the tub or shower base. The shifting of a slab foundation plus low humidity pulls caulk apart seasonally – a re-caulk is fine, but if the line keeps opening you may have a substrate issue.
- Shower valve drip or temperature swing. A failing cartridge is the usual cause on Ameristar tub-and-shower valves, and it worsens fast in Paradise’s mineral-heavy water.
- Vanity top separating from the cabinet base. Adhesive failure along the top joint, often because the vanity was set on an unlevel floor and the weight has been loading one corner.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A full Ameristar bathroom remodel in Paradise runs $9,000 – $28,000 installed, with the scope driving the number. Here’s how line items break down:
| Scope | Installed Price Range (Paradise) |
|---|---|
| Full bathroom remodel (vanity, shower, tile, plumbing) | $9,000 – $28,000 |
| Small bathroom remodel (no layout change) | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Vanity installation (Ameristar cabinet + top + faucet) | $800 – $3,000 |
What drives the range: whether the layout moves, tile selection, waterproofing method (we always use Schluter edge trim and membrane where tile meets floor), and whether the vanity is a stock-size swap or a semi-custom fit. Parts and labor are itemized in your written quote – you see the Ameristar part cost separate from install labor before we pick up a tool. Every job carries the 365-Day Done Right Promise in writing, and if the install fails within the year we make it right with no argument.
DIY or Call Us?
Checking what failed is safe to do yourself: open the cabinet doors, photograph the model sticker, measure the hinge cup, and test the shower cartridge by running hot then cold water for 60 seconds. Swapping a soft-close slide or hinge is genuinely within reach for most homeowners if the measurements match – ten minutes and a screwdriver.
Where DIY goes wrong in a Paradise bathroom is anything behind tile or behind the wall. Replacing a shower valve cartridge requires shutting off the water and seating the new O-ring correctly – an improper fit floods the wall cavity fast. Re-setting a vanity on an unlevel slab without checking for hidden moisture is how a $200 fix becomes a $3,000 subfloor repair. If you’re past the point of a hinge swap, call (866) 977-0526 for a free estimate. We’ll tell you honestly if you can handle it yourself.
FAQs

How long do Ameristar bathroom vanities and fixtures last? Ameristar vanities typically last 10-15 years in a dry climate like Paradise before drawers or hinges need replacing; the cabinet structure itself usually outlasts the hardware by several years.
Can I repair the Ameristar part instead of replacing the whole bathroom? Yes: hinges, drawer slides, shower cartridges, and re-caulking are all repair-level swaps. Whole-bath replacement only makes sense when the failure is structural – a cracked vanity box, a leaking shower pan, or tile that’s already debonded.
How long does the swap take? A vanity hardware swap is a same-day visit. A full shower valve replacement takes 2-4 hours. A full bathroom remodel runs 3-6 weeks depending on the scope, and we send photo updates before and after each phase.
How do you source the Ameristar part? We order OEM Ameristar parts through licensed suppliers and confirm the exact part number with you before purchase. Aftermarket equivalents are only used for hinges and slides, never for anything load-bearing. Call (866) 977-0526 for a free estimate – the written quote includes the part cost and install labor separately. Need KraftMaid, Cambria, or Silestone pricing while you’re at it? We quote those in the same visit.
Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.












