







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Fence Installation: The Paradise Owner’s Guide
Installing an Ameristar fence in Paradise typically runs $3,500 – $9,000 depending on linear footage, grade, and gate count. Most Ameristar aluminum and steel ornamental panels are non-standard, so the right installation plan starts with matching the panel style, post spacing, and gate hardware to your exact Ameristar series. We schedule estimates by phone, usually within a few days, and can often inspect and quote in one visit.
Homeowners in Paradise usually find the problem late. A post rocks in the clay. A panel rattle starts in wind. The bottom rail rusts at the weld and shows only after the paint flakes. In older Rancho Drive-area yards the issue is often concrete footings that heaved; in newer builds off Skyway the issue is undersized post spacing holding up under Sierra wind. Either way, the symptom tells you which part to price before anyone touches a shovel.
Which Ameristar Models This Applies To

Ameristar makes ornamental aluminum and steel fence in several product families (Echelon, Montage, and related residential lines), and the install details differ by series. The panel width is the most important number: most Ameristar residential panels are 6 feet wide or 8 feet wide, and post spacing must match the panel width exactly or the fence will rack and fail at the brackets. Measure center-to-center between existing posts, not the panel face.
Post footings are where Ameristar installs in Paradise most commonly get mismatched. An 8-foot aluminum panel with a gate needs a heavier footing than a 6-foot panel with a tight line run. OEM Ameristar brackets and caps are the safest OEM-style choice, but quality aftermarket equivalents are widely available and often fit the same channel. We recommend OEM for anything structural (posts, gate frames, hinges) and OEM-or-equivalent for caps, brackets, and finials where fit is confirmed.
One compatibility gotcha: Ameristar residential and commercial-grade systems do not share gate hardware. A commercial gate kit on a residential panel will not align at the hinge. Bring the existing post or gate hinge to the estimate if you can. We are an independent installer in Paradise, not affiliated with Ameristar.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Fence Installation Is Failing
- Racking posts. Posts lean or walk out of plumb after rain. Cause: undersized or too-shallow footing for the local clay, or a footing that was never below frost line. In Paradise this failure shows up fast on a 1-foot footing.
- Rust at welds and rail ends. Brown streaks at panel joints mean the factory finish has been breached. Cause: cut ends left unpainted during a previous install, common when a field cut was made onsite and never sealed.
- Rattling panels in wind. Panels flex and hum in Sierra gusts. Cause: pickets not locked into the top and bottom rails, or a panel installed with the wrong rail height for your series.
- Sagging gates. The gate drags on the ground or will not latch. Cause: gate frame too light for the panel weight, or hinges mounted to a post that has begun to move.
- Loose or mismatched hardware. Brackets, bolts, or caps slip. Cause: aftermarket hardware that does not match your Ameristar series, or stainless hardware replaced with galvanized without a check.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Fence installation in Paradise runs $3,500 – $9,000 for Ameristar-compatible work, and the number depends on four drivers: linear footage, panel series, gate count, and footing depth. A short 6-foot residential run without a gate sits near the bottom of that range. A longer run with two gates, a slope, and heavier footings pushes toward the top.
| Line item | Typical installed range |
|---|---|
| Standard Ameristar-compatible residential run (no gate) | $3,500 – $6,000 |
| Extended run or sloped yard | $5,500 – $8,000 |
| Single gate install | $6,000 – $9,000 |
| Two-gate or custom run | $7,500 – $9,000 |
Every quote is written line-by-line: panels, posts, footings, gates, hardware, and labor. The written price before work starts is the price you pay. The 365-Day Done Right Promise backs the install for a full year. If it’s not done right, we make it right, in writing.
DIY or Call Us?
You can safely check your own Ameristar fence without a shovel. Walk the line, confirm every post is plumb with a level, measure center-to-center spacing, and photograph any rust or weld cracks. That information alone tells a technician most of what they need.
Where DIY goes wrong on fence install is the footing. An undersized footing will look fine for months and fail after a wet spring. Pulling and re-setting an Ameristar post without a proper base, depth, and mix is the number-one cause we see of repeat failure in Paradise. Gates add a second failure point: a gate frame out of square will not hang true even with new hinges. For a post or gate, call us. Call (866) 977-0526 for a free estimate.
FAQs

Twenty to thirty years with proper footings and finish maintenance. The aluminum itself does not rust, but weld breaches and field-cut ends will corrode in Paradise’s dry-then-wet cycles. Touch-up paint on damaged coatings each year is the difference between 22 and 28 years. Call (866) 977-0526 for a free estimate on repair or replacement.
Often yes; one post, one panel, or one gate can be repaired without touching the rest of the run. Fence companies quote repair at a fraction of the full install when the footing and panels are otherwise sound. Our technician inspects first and quotes both options in writing before anything starts. Call (866) 977-0526 to schedule.
A standard residential run in Paradise completes in two to four days weather-permitting. Footings require cure time before panel and gate hang, so the schedule is set by the concrete, not the labor. We confirm every day of the install schedule in writing before work starts.
We source OEM Ameristar parts through distributor channels and confirm fit by series and panel width before ordering. For non-structural hardware where OEM is not available, we quote a quality equivalent and note the substitution in the written estimate. You approve before we order.
Sawyer Remodeling Paradise is an independent remodeling contractor. We are not affiliated with Ameristar Fence Products. We also source kitchen and bath materials from KraftMaid, Cambria, and Silestone for whole-home clients.
Give us a call at (866) 977-0526 for a free estimate. The written price lands before any work starts, live arrival time is confirmed the morning of, and you get photo updates before and after. That’s The Relay Visibility Guarantee, and it applies to every Paradise fence install.
Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.












