







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Fence Installation: The Paradise Owner’s Guide
Barrette fence installation in Paradise typically runs $3,500 to $9,000 installed, depending on linear footage, series, and gate count. We install Barrette-compatible vinyl and aluminum fencing, source the correct posts, rails, and caps for your specific series, and put the price in writing before any digging starts. Most Paradise jobs are scheduled within days of the estimate, not weeks.
Owners usually find out something is wrong the same way: a post leans after a wind event, a rail pops loose from its bracket, or a gate that closed cleanly in April drags on the ground by August. Barrette systems are engineered and labeled by series, and in Paradise’s sun and soil, the first failures almost always trace back to footing depth or a part matched to the wrong profile.
Which Barrette Models This Applies To

Barrette Outdoor Living makes several distinct fence families, and the parts don’t cross over. The vinyl lines most common on Paradise properties are the Wakefield and Brookline styles, plus the Select and Grand Illusions series sold through big-box and dealer channels. The aluminum side includes the Active and Euro styles, plus ornamental lines like the Chesapeake and Ashland. Each has its own post, rail, and bracket geometry, so a Wakefield rail won’t seat into a Brookline post and an Active gate kit won’t fit a Euro frame. That mismatch is the single most common reason a Paradise homeowner ends up with a box of parts that don’t work.
To identify what you have, start with three things. Measure the post cross-section (nominal 4×4, 5×5, and 6×6 all exist across the lines). Measure the rail profile width and the distance between rail notches. Then look for a stamp, sticker, or embossed mark on the inside face of a rail or the underside of a cap. Barrette marks its product; a phone photo of that label is usually enough for us to confirm the series before we order anything.
On the OEM-versus-aftermarket question, the honest answer is that it depends on the part. For structural brackets, post caps that lock down a rail, and gate hardware, OEM Barrette parts are worth the premium because the tolerances are what hold the system square. For a plain flat cap or a replacement picket, a quality aftermarket equivalent from a known extruder performs the same and costs less. We’re an independent installer, not affiliated with Barrette, so we’ll tell you which is which for your fence rather than pushing one path.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Fence Installation Is Failing
- Leaning posts after monsoon wind. Barrette vinyl posts depend on a properly set concrete footing, typically a third of the post’s above-grade height below grade. When a Paradise installer set a shallow footing in our caliche-heavy soil, the post rocks and the concrete cracks loose within a season or two.
- Rails popping out of the post notch. This is usually a bracket or insert that was sized for a different series or never fully seated. In summer heat the vinyl expands, the notch loses grip, and the rail works itself free under its own weight.
- Gate sag and drag. Hinges and gate frames take the most load in any fence, and standard hinges on a wide gate flex over time. A gate that scrapes the ground by late summer is telling you the hinge or the gate frame needs attention, not just an adjustment.
- Sun chalk and color fade. Paradise UV is brutal, and vinyl will chalk and lighten over years regardless of brand. Uneven fading across adjacent panels often points to a mixed batch or a replacement picket from a different run.
- Cracked rails at the notch or cap. Vinyl gets brittle as it ages and cold-snaps at stress points. A hairline crack at the rail notch is the early warning that the part is about to fail outright.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Fence installation in Paradise for a Barrette-compatible system runs $3,500 to $9,000 for a typical residential run. That range covers materials, footings, posts, rails, caps, a gate, and labor. What moves the number: linear footage, gate count and width, post spacing, whether an old fence needs removal and haul-off, and whether the original footings are reusable.
- Materials (posts, rails, pickets, caps, brackets, gate hardware): roughly 45 to 55% of the total.
- Footing work and installation labor: roughly 35 to 45%, higher where old concrete has to be broken out.
- Old fence removal and disposal: adds a few hundred dollars on most Paradise jobs.
We put that breakdown in writing before we pick up a tool, as part of The Relay Visibility Guarantee, so the invoice matches the number you approved. Workmanship carries our 365-Day Done Right Promise: if a post, rail, or gate we installed isn’t right within a year, we come back and make it right.
DIY or Call Us?
Some things are safe to check yourself. You can walk the fence line, push on each post to feel for movement, photograph any label on a rail or cap, and measure post and rail dimensions. That’s genuinely useful and it helps us order the right part the first time.
What goes wrong in a DIY replacement is footing work and gate re-hanging. Setting a Barrette post correctly means digging through Paradise’s hard soil to the right depth, pouring and curing concrete, and keeping the post plumb while it sets. Get it wrong and the new part fails within a season. Gate frames add real weight and pinch points, and a mis-hung gate can swing or drop. If you’ve got a leaning post or a failed gate, that’s the moment to hand it off. Call (866) 977-0526 and we’ll give you a written price before any work begins.
FAQs

A well-installed Barrette vinyl fence typically lasts 15 to 20 years in Paradise conditions. UV exposure and monsoon wind are the two biggest factors, and both come down to material grade and footing quality, not the brand alone.
Often yes. A popped rail, a loose cap, or a gate that needs new hardware is usually a repair, not a full replacement. A cracked rail or a post with a failed footing typically needs the section replaced. We’ll tell you which after looking at it.
A single rail or gate hardware repair is often a same-day job. Replacing a post and re-pouring the footing takes longer because the concrete has to set before the section is rehung. We’ll give you the timeline in the written estimate.
We start from your fence’s measurements and any label you can photograph, confirm the series, then order the matching part. We don’t keep parts on a truck, so the right part gets ordered for your fence rather than guessed from a shelf. We also handle KraftMaid, Cambria, and Silestone selections for remodeling clients, but for fencing we’re focused on getting your Barrette system back to square. Call (866) 977-0526 for a free estimate.
Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.












