







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Home Additions & ADU: The Paradise Owner’s Guide
We build and finish Barrette home additions and ADUs for Paradise homeowners, with typical installed project pricing from $45,000 to $130,000 depending on footprint, finish level and how the unit ties into your existing roofline and utilities. A garage conversion on the low end of that work runs $30,000 to $80,000, while a full detached ADU can reach $90,000 to $220,000. Sawyer Remodeling Paradise is an independent remodeling contractor and is not affiliated with Barrette; we work with the brand’s materials and components, not as a factory representative.
Most owners don’t realize an addition or ADU has a failing component until something announces it. A door that used to close with two fingers now catches at the top corner. A wall that reads straight in the afternoon shows a hairline crack at the ceiling joint by evening. In Paradise, where summer highs sit above 100°F and the ground moves through our shrink-swell clay soils, those small signs are usually the first chapter of a larger story, not a cosmetic quirk. Catching that chapter early is what keeps a $45,000 project from becoming a $90,000 one.
Key Takeaways
- Barrette additions and ADUs in Paradise typically run $45,000 to $130,000 installed.
- Most failures trace to movement, moisture or a component that was undersized for the desert swing between summer heat and winter cold.
- Structural or gas-adjacent work is not a homeowner job. We say so plainly below.
- Every project comes with a written price before any tool is picked up, under The Relay Visibility Guarantee.
Which Barrette Models This Applies To

Barrette additions and ADU kits don’t all share the same components, so the first job is matching your specific model line before anyone quotes a part. The identifying details live in three places: the stamped plate on the wall panel or header beam, the paperwork packet that came with the unit (usually a spec sheet with panel dimensions and load ratings), and the physical measurements of the component you’re replacing. Bring us all three if you have them, and we’ll confirm compatibility before ordering.
The compatibility gotcha most Paradise owners hit is panel thickness and header sizing. A panel that measured 4-1/2 inches in a mid-2010s run can spec at 5-1/2 inches in a later series, and a replacement header cut for the older spec won’t seat without shimming that changes your load path. That’s the kind of mismatch that fails an inspection and voids a warranty, and it’s exactly why we measure on-site instead of trusting a photo.
On the OEM-versus-aftermarket question: Barrette factory parts guarantee the spec match but carry a longer lead time. Quality aftermarket equivalents can work for non-structural trim and closure components, but for anything carrying load, wind resistance or fire separation, we stay with OEM or a spec-matched equivalent we can document. When a part is unavailable, we tell you the timeline honestly rather than substituting and hoping.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Home Additions & ADU Is Failing
- Hairline cracks at wall-to-ceiling joints. These typically mean foundation or header movement, not settling paint. In Paradise’s clay soils, seasonal heave opens and closes these cracks, so a crack that “comes back every spring” is a real signal.
- Doors or windows that stick only in certain months. A door that drags in July and frees up in November points to thermal expansion in the panel or a header that wasn’t sized for the heat swing. It’s the frame telling you it’s under stress.
- Musty smell or cool damp spots near the floor line. This signals a flashing or membrane failure letting monsoon moisture in. Paradise’s July and August storms drop more water in an afternoon than some months get in total, and a small gap becomes interior damage fast.
- Roof-to-wall separation you can see from the yard. A visible gap or lifted flashing means the tie-in has failed. That’s a structural concern, not a trim fix, and it needs a professional look before the next storm.
- Sagging header or a dip in the ceiling line. This is the most serious symptom on the list because it points to undersized or failed structural members. Stop using the space and get it assessed.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Barrette-compatible structural and finish repairs inside a Paradise addition or ADU usually run $45,000 to $130,000 for a full-scope build-out and repair package, or $30,000 to $80,000 for a garage conversion that stays within the existing shell. Smaller component swaps (a header, a flashing repair, a closure panel) fall well below that and get their own line-item quote.
What drives the range: footprint size, whether the repair touches the load path, finish level, and how much existing work has to be opened up to reach the failing part. We give you a written price before any work starts, so the number on the invoice is the number you approved. Every repair carries a written guarantee and a free second visit if it fails. The 365-Day Done Right Promise covers the project for a full year after close, and material selections draw on manufacturer-backed brands across the finish, including KraftMaid, Cambria and Silestone.
DIY or Call Us?
Some things you can safely check yourself: run a straightedge along the header, photograph the wall panel label, note which doors stick and in what season, and look at roof flashings from the ground with binoculars. None of that involves turning a wrench, and it all helps us quote accurately.
What you shouldn’t do: open the load path. Any repair that touches a header, a load-bearing panel, the roof tie-in, or gas or electrical runs inside the addition is a job for a trained professional. A header replacement done without accounting for the wind and seismic load your Barrette unit is rated for can fail inspection, compromise the warranty and put the structure at risk. Our technicians have up to 21 years of experience, they’re background-checked and uniformed, and you’ll know their arrival time before they pull up. Call (866) 977-0526 and we’ll schedule a free estimate.
FAQs

A properly installed Barrette structural component should hold for 20 to 30 years, but Paradise’s heat and clay soils shorten the tail end of that range if flashing and drainage aren’t maintained. The biggest factor isn’t the part, it’s how well the exterior tie-in keeps monsoon water out. Call (866) 977-0526 for a free inspection and we’ll tell you what the remaining lifespan looks like on your specific unit.
Often yes, especially for flashing, closure panels and trim, which are the cheaper and faster fixes. Structural members like a sagging header usually need replacement rather than patching, because a shimmed repair doesn’t restore the original load path. We’ll tell you which case you’re in after an on-site look, with the reasoning spelled out. Estimates are free.
A trim or flashing component swap is usually a single-day job. A structural repair that involves opening the wall and replacing a header takes roughly two to five days depending on finish work and inspection scheduling. We give you the timeline in the written quote before anything starts. Call (866) 977-0526 to get your project on the schedule.
We source directly from Barrette or through a spec-matched supplier, and we confirm dimensions against your unit’s stamped plate and paperwork before ordering. If the exact part is unavailable, we tell you the real lead time instead of substituting a non-compliant equivalent. That’s the difference between a repair that passes inspection and one that comes back. Free estimates, no chasing.
If your Barrette addition or ADU in Paradise needs a part matched, priced and installed right the first time, call (866) 977-0526. We’ll give you a welcome arrival time, a written price before work begins, and photo updates before and after, all under The Relay Visibility Guarantee. That’s how a repair should run in Paradise.
Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.












