







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Kitchen Remodeling: The Paradise Owner’s Guide
We handle Barrette kitchen parts and full Barrette-compatible kitchen remodeling in Paradise, with most complete kitchen projects running $14,000 – $45,000 installed and single-part swaps priced as their own line item. If you’re replacing one failed component rather than the whole kitchen, we quote the part and the labor together, in writing, before anything is ordered. Barrette cabinetry and trim parts fail in predictable ways, and Paradise owners usually find out the same way: a drawer that won’t track straight, a cabinet door that sags at the hinge, or a finish that’s chalking and lifting on the sun-facing run of uppers. We’re an independent service provider, not affiliated with Barrette, so we’re matching your existing part on spec and fit rather than pushing whatever the brand wants moved this quarter.
Which Barrette Models This Applies To

Barrette makes a wide spread of kitchen products – cabinet doors, drawer fronts, hinges, slides, toe kicks, filler strips, and decorative trim – and the part that fits one series will not fit the next. The manufacturer’s label is usually the fastest way to sort it: look inside a cabinet door or on the back of a drawer box for a series code and a size callout, then measure the opening yourself. Nominal sizes drift against real measurements. A “24-inch” Barrette base cabinet opening commonly measures somewhere in the 22½ to 23½ inch range at the frame, and if you order a door or drawer front off the nominal number alone, it won’t sit flush.
The OEM-versus-aftermarket call matters here. For visible parts – doors, drawer fronts, decorative panels – the finish is the whole job, and a generic aftermarket door in a similar color will read as a mismatch the moment Paradise afternoon light hits that wall. For hidden hardware – hinges, slides, brackets – a quality aftermarket equivalent from a known maker often outlasts the original and costs less, as long as the mounting pattern and load rating match. We tell you which side of that line your part falls on before you commit. If your kitchen has some KraftMaid or other brand cabinetry mixed in, we handle those matches too.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Kitchen Remodeling Is Failing
- Doors that sag or rub the frame. The hinge plate has loosened from the cabinet side, or the hinge itself has worn past adjustment. Once the screws start spinning in the wood, tightening them again buys you a week.
- Drawers that bind, tilt, or drop out of the track. A failed slide, or a slide that was never rated for the drawer’s loaded weight. This shows up first in the heavy pots drawer and spreads from there.
- Finish chalking, peeling, or blistering on sun-facing uppers. Paradise gets intense UV and long dry stretches, and cabinet finishes on a west- or south-facing wall take that load year after year. This is a climate story, not a cleaning story.
- Swelling or separation at the cabinet box seams. Usually moisture wicking up from a slow sink or dishwasher leak. By the time the seam shows, the particleboard behind it has already been wet for a while.
- Trim, filler strips, and toe kicks pulling loose. Adhesive and fastener failures from years of expansion and contraction in a kitchen that swings between air-conditioned and hot. Small part, real visual mess.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Barrette-related kitchen work runs in Paradise. These are installed prices, parts and labor together, not parts-only numbers:
| Work | Installed range |
|---|---|
| Full Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What pushes a project toward the top of those ranges: custom door profiles, finish matching to an existing run, structural changes, and countertop material. Surfaces from Cambria, Silestone, and Caesarstone cost more than laminate and wear better under Paradise’s heat and sun. The price we give you is written before any work starts, so the invoice matches what you approved. Every job carries the 365-Day Done Right Promise – if it’s not done right within a year, we make it right, in writing.
DIY or Call Us?
Some of this you can safely check yourself: open every drawer and door, watch where it binds, look for a manufacturer label, measure your openings, and photograph the part that failed. That’s useful information and it costs nothing.
Where DIY goes wrong is the swap itself. Cabinet boxes are load-bearing in ways people don’t expect – a wall cabinet full of dishes comes off the wall and comes down on whoever is under it if the fasteners aren’t in studs or proper anchors. Cutting a replacement door or drawer front to fit means cutting a finish that can chip along the edge, and once it’s cut there’s no returning it. Hinge and slide mounting patterns have to match to the millimeter or the whole run goes out of alignment. And if there’s water damage behind the seam, you’re installing a new part over a wet box that will fail again. We’re background-checked and uniformed, you’ll know who’s coming and when, and we’ll quote it in writing first. Call (866) 977-0526.
FAQs

Hinges and slides in regular daily use typically give you somewhere around 7 to 12 years before adjustment stops holding, and cabinet finishes on a sun-exposed wall often age faster here because of the UV and dry heat. Parts in low-use cabinets last well past that. If yours are past the decade mark and starting to fail, call (866) 977-0526 – estimates are free.
Sometimes, yes – a hinge that’s merely out of adjustment or a slide with a loose mount can often be corrected for far less than a replacement, and we’ll tell you honestly when that’s the case. Once the hinge plate has torn out of the cabinet side or the finish has failed, repair turns into a patch that fails again. Call (866) 977-0526 and we’ll look before we quote.
A single door, drawer front, or hardware swap is usually a short visit – often a couple of hours or less once the correct part is on site. Multi-door runs, cabinet replacements, or anything involving finish matching takes longer because the parts have to be verified against the existing run first. Call (866) 977-0526 to get a real timeline for your job.
We identify your series from the manufacturer label and confirm fit by measuring the actual opening, then source the part to that spec – OEM where the finish or fit demands it, a quality equivalent where the hidden hardware allows it. We don’t claim to stock Barrette parts, so lead time is quoted upfront and honestly. Call (866) 977-0526 for a written estimate.
If your Barrette kitchen is showing its first real failure, the smart move is a written price before anything gets ordered. Call Sawyer Remodeling Paradise at (866) 977-0526 for a free estimate – you’ll get a live arrival time, photo updates before and after, and a number you approve before work starts. Our technicians have up to 21 years of experience, and every job is governed by The Relay Visibility Guarantee. We also work with KraftMaid cabinetry and Cambria and Silestone surfaces when a repair grows into a remodel.
Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.












