







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Blanco Home Additions & ADU: The Paradise Owner’s Guide
We build and finish Blanco-compatible home additions and ADUs in Paradise, and the typical all-in range for a Blanco-spec addition here runs $45,000 – $130,000 depending on footprint and finish level; a full ADU lands between $90,000 and $220,000. An addition isn’t a part that snaps out and back in, so “failure” shows up differently: the Blanco-specified door or window unit that’s fogged and leaking at the frame, the cabinet line that’s pulled away from the wall, the finish schedule that never matched the rest of the house. Owners usually find out during a punch-list walk, an insurance inspection, or the first big monsoon when water finds the seam. This guide is about matching the right Blanco component to your model, pricing it honestly, and getting it installed by people who pull permits.
Sawyer Remodeling Paradise is an independent remodeling contractor. We’re not affiliated with Blanco, and we don’t stock or carry parts on a truck – we source the right component for your model and install it.
Which Blanco Models This Applies To

Blanco’s product lines run across several series and generation codes, and the part that fits one generation often won’t seat in the next. The label inside the cabinet door, on the appliance plate, or on the door jamb of a fixture is where you start: it carries the model number and a date code, and that date code matters more than most homeowners expect. A component built for an early run of a series can have a different mounting pattern than the same series from two years later. Measure twice before you order – hole spacing, overall depth, and the hinge or bracket side.
The OEM-versus-aftermarket call for Blanco comes down to two things. OEM gets you an exact fit and the manufacturer’s backing on the part itself, which is what you want on anything structural or weather-exposed. A quality aftermarket equivalent can save real money on cosmetic pieces – a shelf pin, a trim cap, a cover plate – where fit tolerance is loose. For anything that closes, seals, or bears load, we default to OEM-spec. If you’re also refacing or replacing cabinetry around the addition, KraftMaid and Cambria are the lines we work with most in Paradise, and they carry their own manufacturer backing on top of the install.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Blanco Home Additions & ADU Is Failing
- Fogging or condensation inside a sealed unit. The seal has failed and moisture is trapped between panes. In Paradise’s summer heat and dust, that seal degrades faster than the manufacturer’s rating suggests.
- Water staining at the frame or floor line. Usually a failed gasket or flashing detail, not the glass itself. Left alone, it wicks into the wall assembly and turns a $600 fix into a $6,000 one.
- Doors that drag, stick, or won’t latch square. The frame has shifted, often from settling or a header that was undersized for the span. It reads as a hinge problem and is almost never just the hinge.
- Cabinetry pulling away from the wall or gaps at the seam. Anchor failure or a wall that wasn’t flat when it was set. This is common where an addition meets the original house and the two move differently.
- Finish or trim cracking at the corners. Movement, plain and simple. It tells you the joint wasn’t built to flex, and it’ll keep cracking until the joint is rebuilt properly.
Replacement Cost & What’s Included

Here’s what the work actually runs in Paradise. Every number below is an installed range – parts plus labor – because a part price alone doesn’t tell you what you’ll pay at the end.
| Project | Installed Range |
|---|---|
| Home addition (Blanco-spec finishes) | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
What drives the range: footprint, whether the foundation and utilities are new or tied into the existing house, and how deep the finish schedule goes. A single component swap on an existing Blanco unit sits far below these ranges and gets quoted line by line. What doesn’t change: you get a written price before any work starts, and the number on the invoice is the number you approved. Every job is covered by our 365-Day Done Right Promise – if it’s not done right, we make it right, in writing.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this you can safely check yourself. Read the model label, photograph it, measure the opening and the hole spacing, and note the date code. That alone saves a week of back-and-forth. What we’d steer you away from: pulling a sealed unit out of a wall opening, resetting a header, or re-flashing a frame. Those aren’t hard because of the tool – they’re hard because a bad seal or an undersized header shows up months later as water damage or a wall that sags. Additions and ADUs also need permits pulled and inspections passed, and unpermitted structural work in Paradise is a problem at resale, not just at inspection. Our technicians have up to 21 years of experience on exactly this kind of work, and every one of them is background-checked and arrives in uniform – you know who’s coming before they knock.
Give us a call at (866) 977-0526 and we’ll tell you whether it’s a component swap or a bigger job. Estimates are free and the price comes to you in writing.
FAQs

Expect 15 – 25 years on a properly installed, OEM-spec sealed unit, and 10 – 15 on exterior trim and finish details. Paradise’s heat cycling and summer dust load push everything toward the shorter end of that window, which is why the install detail matters more than the spec sheet. If your unit is past 12 years and showing fog or staining, it’s worth a look before monsoon season. Call (866) 977-0526 for a free assessment.
Sometimes. A failed gasket, a hinge, or a trim cap is a repair, and we’ll tell you so rather than sell you a replacement. A failed sealed glass unit, a shifted frame, or a pulled cabinet anchor is a replacement – repairing those is patching, and it comes back. We’ll give you the honest call on which one you’re looking at. Call (866) 977-0526 for an exact quote – estimates are free.
A single component swap is typically a few hours to a day, depending on access. Cabinet or countertop work around an addition runs one to three days. A full addition or ADU is a multi-week project with permits and inspections, and we schedule it in writing before we start. You’ll get a live arrival time and photo updates before and after, so you’re never chasing us for status. Call (866) 977-0526 to book the estimate.
We match your model and date code to the correct Blanco-spec component and order it through manufacturer-backed channels – not a mystery supplier. We don’t claim to keep parts on a truck; we confirm the right part first, then schedule the install once it’s in hand. Material selections for the surrounding work run through lines like KraftMaid, Cambria, and Silestone, each with manufacturer backing behind the install. Call (866) 977-0526 and we’ll get your model number into the right order.
Get Your Blanco Addition Priced in Writing
Whether you’re chasing a failed component or planning a full addition off the back of the house in Paradise, the first step is the same: a written price before any work starts. That’s not an upgrade here, it’s how every job runs under The Relay Visibility Guarantee – live arrival time, photo updates before and after, and a digital invoice you pay from a link. Call Sawyer Remodeling Paradise at (866) 977-0526 for a free estimate. We answer with a live person, day or night, and our technicians have up to 21 years of experience on Blanco-compatible builds.
Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.












