







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Home Additions & ADU: The Paradise Owner’s Guide
We build and finish Boral-clad home additions and ADUs for Paradise homeowners, and installed projects here run $45,000 – $130,000 for additions and $90,000 – $220,000 for a full ADU. This isn’t a one-visit swap. It’s a months-long build with inspections, and it starts with a written price before anyone swings a hammer.
Paradise owners usually come to us after one of three things happens: a Boral-clad addition from years ago is showing moisture staining under the panel seams, a converted garage or casita never passed final inspection, or an ADU plan stalled at the Clark County permit desk because the exterior cladding spec didn’t match the wildfire zone requirements on the drawings. If any of those sound familiar, the fix isn’t a part. It’s a scope of work, priced in writing, with a schedule you can hold us to.
Which Boral Models This Applies To

Boral is an Australian building products group, and the products Paradise homeowners actually touch from a Boral line are exterior cladding systems and their associated trims and flashing components. For additions and ADUs, that means identifying the cladding product family and its matching trim profile before anything gets ordered. Boral’s line cards change; the label on the bundle wrap is the source of truth, not what a supplier’s catalog said last year.
The compatibility gotcha that trips up Paradise builders: Boral trim profiles are matched to specific cladding series, and the flashings are not interchangeable across those series. A trim that fits one profile leaves a gap at the panel joint on another. That gap is where wind-driven rain off the Sierra foothills gets in. Before we quote, we pull the label, measure the actual panel thickness with a caliper, and cross-check the trim profile.
OEM versus aftermarket on Boral cladding: OEM trim and flashing keeps the manufacturer’s warranty intact and matches the profile exactly. Quality aftermarket equivalents are fine for hidden flashing and blocking, where appearance doesn’t matter but water shedding does. We’ll tell you which line items can take a substitute and which can’t, in writing, before you approve.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Home Additions & ADU Is Failing
Most Paradise failures show up months after the fact, because the damage starts behind the surface. Here’s what we see on inspections in this market:
- Staining or dark streaks under panel seams. Water is getting behind the cladding, usually through a missing or wrongly profiled kick-out flashing where the addition wall meets a roofline. That roofline is a common spot in Paradise because snow load design and roof pitch on additions often differ from the main house.
- Caulk joints failing within a season or two. Ultraviolet exposure in Paradise is intense, and a caulk matched to the wrong substrate shrinks and pulls away. That’s not a caulk problem; it’s a substrate-prep or product-mismatch problem.
- Panel movement or oil-canning. Cladding that wasn’t given the manufacturer’s required clearance for thermal expansion buckles at the fasteners as the wall heats and cools. The fix is usually refastening with the correct fastener and clearance, not a full tear-out.
- Rust at the fasteners. Wrong fastener for the exterior grade, or fasteners driven too close to the panel edge. Rust stains show up before the wall fails, so this one is a gift.
- A never-passed ADU final inspection. Often it’s an exterior cladding or flashing spec that was never installed as drawn, so the inspector flags the envelope. We re-open the scope and fix it to the approved drawings.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

We price additions and ADUs in Paradise in writing before any work starts, and the range is wide because the scope is wide. Here’s how it lands:
| Project | Installed Price Range in Paradise |
|---|---|
| Home Addition (Boral-clad exterior) | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
What drives the number: foundation and site work, framing and envelope, the Boral cladding and trim package, MEP rough-in and finish, and Clark County permitting and inspections. A standard addition with a straightforward roofline sits near the low end. An ADU with its own kitchen, bath, and utility meter runs toward the top.
Our written price covers parts and labor as a single line-item scope, not a mystery lump sum. No-hassle upfront pricing means the number you approve is the number on the invoice. The 365-Day Done Right Promise backs the work for a full year after close, in writing.
DIY or Call Us?
Here’s the honest split. You can safely document the problem: photograph the staining, measure the panel thickness, locate the product label on a bundle wrap, and note where water is tracking. You can also read your approved permit drawings to see whether the cladding spec installed matches what the inspector approved.
What you shouldn’t do is re-flash an addition wall, refasten cladding at a roofline, or open up an envelope to chase water on your own. Water intrusion behind a wall means rot, and rot behind a load-bearing wall means structural work. Additions and ADUs also require permits in Paradise; unpermitted work on a permitted structure can undo your occupancy or your loan. That’s trained-professional territory, and getting the flashing wrong the first time means doing it twice.
Our technicians have up to 21 years of experience on envelopes and additions. Call (866) 977-0526 to schedule a free estimate.
FAQs

How long does Boral exterior cladding last on a Paradise addition? A properly flashed and fastened Boral cladding system can go decades, but the lifespan that matters is the flashing and sealant behind it. Paradise UV and wind-driven rain wear out caulk joints and kick-out flashings first, and those are what we inspect and replace. Call (866) 977-0526 for a free estimate on your addition.
Can a failing Boral-clad addition be repaired instead of rebuilt? Often, yes. If the water intrusion is localized to a flashing or trim detail, the repair is re-flashing and refastening, not a tear-out. If rot has reached framing, the scope grows. We tell you which one it is in writing before you commit. Estimates are free: (866) 977-0526.
How long does an addition or ADU take in Paradise? An addition typically runs several months including permitting and inspections; an ADU can run longer. We give you a schedule with the written price, plus live arrival times and photo updates under The Relay Visibility Guarantee. Call (866) 977-0526 to start the estimate.
How do you source Boral-compatible materials? We confirm the product family and trim profile from the label and the approved drawings, then order to that spec through manufacturer-backed suppliers. We’re an independent provider and not affiliated with Boral; we specify what the job needs and tell you in writing where a substitute is acceptable and where it isn’t. Call (866) 977-0526 for a free estimate.
Whether you’re pricing a first addition, finishing an ADU that stalled at inspection, or repairing a Boral-clad wall that’s letting water in, the first step is the same: a written scope and a written price before any work starts. We also handle KraftMaid, Cambria, and Silestone selections when the space inside needs finishing. Call Sawyer Remodeling Paradise at (866) 977-0526 to schedule your free estimate. Live person answers, every call.
Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.












