







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Home Additions & ADU: The Paradise Owner’s Guide
We install CGI-compatible home additions and ADU packages in Paradise, and installed pricing typically runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU. For a screened-in enclosure or modular room addition to a CGI home, most Paradise owners land between $45,000 and $85,000 depending on footprint and whether the slab is already poured. The part that fails first is almost never the structure itself. It’s the connection: the factory-supplied sill plate, the panel-to-frame gasket, or the tie-down strap the original install spec called for. Paradise homeowners usually find out after a hard rain pushes water past a tired gasket, or after a wind event lifts a corner slightly and the door stops closing square.
Which CGI Models This Applies To
CGI builds a wide range of panelized and modular structures, and the addition or ADU connection kit differs by series. The panel profile on a mid-2000s Legend-series shell does not swap cleanly onto a late-2010s series with a deeper sill channel, even though the footprints look the same on paper. Before we quote anything, we read the data plate – usually a stamped metal tag inside the electrical panel or riveted to the main frame rail near the entry door – and match the series, panel thickness, and tie-down spec on that tag, not the model name the owner remembers. Where an OEM gasket or strap is discontinued, we match a quality aftermarket equivalent by dimension and load rating, then note the substitution in writing. We’re an independent service provider, not affiliated with CGI, so we’re sourcing against the spec on your structure rather than a catalog tied to one brand. KraftMaid, Cambria, and Silestone come up often on interior finish work that follows the addition.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Home Additions & ADU Is Failing
- Water staining along the sill line after rain. The panel gasket has flattened and stopped sealing, which lets wind-driven rain track under the plate and wick into framing.
- A door that sticks or won’t latch flush. This points to a shifting tie-down or a strap that has loosened, letting one corner settle out of plane in Paradise’s shrink-swell soil.
- Visible rust on steel connectors. Desert morning condensation and monsoon humidity eat through uncoated straps and clips, and a rusted connector loses holding strength before it fails outright.
- Daylight or a draft at the panel seams. Panel-to-panel fasteners have backed off, opening a gap that grows with each thermal cycle between a cold high-desert night and a hot afternoon.
- New cracks radiating from corners or openings. Often the addition is fine and the anchor points have aged out, so the movement telegraphs into drywall and stucco.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here in Paradise, a screened enclosure or small modular room addition runs $45,000 – $130,000 installed, a detached or attached ADU runs $90,000 – $220,000, and a garage conversion sits at $30,000 – $80,000. What drives the range is footprint, foundation condition, and how much of the existing shell can be reused rather than rebuilt. Our written price lands before any work starts, line-itemed by materials and labor, so the number on the invoice is the number you approved. That figure includes the matched connector kit, the install, and permitting and inspections pulled and passed. The work carries the 365-Day Done Right Promise, and if a repair fails, we make a free second visit.
DIY or Call Us?
You can safely read the data plate, photograph it, and measure panel thickness and footprint. That’s the useful part an owner can do. What you shouldn’t do yourself is re-anchor a tie-down or re-seal a structural panel: these connectors carry load, and a strap pulled to the wrong torque or set into soft soil gives way under wind or settlement, which can let a roof or wall section move. A wrong gasket also traps water behind the panel where you can’t see it. This is genuine structural and weather-barrier work, so it belongs with trained hands. Our technicians have up to 21 years of experience, and they’re background-checked and uniformed. Call (866) 977-0526 to schedule your free estimate.
FAQs

A properly installed PVC or EPDM panel gasket typically lasts 12 – 20 years, and steel tie-down straps last until the coating gives out, often 15 – 25 years in Paradise’s dry-hot cycles. UV exposure and monsoon humidity both shorten that, so we inspect connectors every few years rather than waiting for a leak. Call (866) 977-0526 for a free inspection estimate.
Sometimes, yes – a gasket can be re-seated and a strap re-torqued if the underlying panel and framing are sound. If the panel edge has rotted or the strap has lost section to rust, repair won’t hold and replacement is the honest call. Our written quote tells you which we recommend and why.
A gasket or tie-down replacement on a single addition usually takes one to two working days once the matched part is on site. A full panel connection rebuild or a larger enclosure scope runs longer, and we give you a written timeline before we start. Reach us at (866) 977-0526.
We match against the spec on your CGI data plate – series, panel thickness, and load rating – and where the OEM part is discontinued we use a quality aftermarket equivalent, noted in writing. We don’t claim any stock or parts carried on a truck; we source to your structure. Call (866) 977-0526 for an exact quote, free of charge.
Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.












