







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Home Additions & ADU: The Paradise Owner’s Guide
We build and finish Dvele-compatible home additions and ADUs for Paradise homeowners, with typical projects running $45,000 to $130,000 for an addition and $90,000 to $220,000 for a full ADU depending on size, foundation, and finishes. A written price lands in your hands before any work starts, and our technicians bring up to 21 years of experience to the build. Owners usually find the problem before the failure is obvious: permits that stalled years ago, an addition shell that was never fully weathered, or a back-of-house wall that started staining by the second monsoon. In Paradise, the tell is often hairline cracking at the addition seam after a summer of 110-degree swings.
Key Takeaways
- Dvele builds modular and prefab homes; additions and ADUs attached to one need spec-matched tie-ins, not generic framing.
- Installed pricing in Paradise: additions $45,000 – $130,000, ADUs $90,000 – $220,000, garage conversions $30,000 – $80,000.
- Structural tie-in, foundation, and envelope work is not a homeowner project. We flag what to check, not how to build it yourself.
- Every Sawyer Remodeling Paradise job carries the 365-Day Done Right Promise and a written price before work begins.
We provide independent installation and finishing work and are not affiliated with Dvele.
Which Dvele Models This Applies To

Dvele’s lineup splits into modular and prefab home series, and the addition question comes down to how your specific model was engineered: wall panel construction, roof load path, and where the structure was designed to accept a tie-in. That means there’s no single “Dvele addition kit.” The right approach gets matched to your model’s framing and panel system, your existing plans or spec sheet, and the load calculations for your lot.
How to identify what you’re working with: check the documentation packet that came with the home (Dvele ships one), look for a data plate or serial label typically inside the utility area or near the electrical panel, and note the model series and build date. If the packet is gone, we measure the panel spacing and roof pitch on site and cross-reference against the build records you can request.
On OEM versus aftermarket: Dvele structural components are proprietary, so the tie-in detailing has to respect the original engineering rather than substitute off-the-shelf pieces. Where matching is critical, we specify to the original spec. Where a code-compliant alternative meets the same structural requirement, we tell you plainly and price both options. Finishes are a different story. Once the shell is tied in, we finish the interior to your taste using proven brands like KraftMaid and Cambria, so the addition matches the house instead of fighting it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Home Additions & ADU Is Failing
- Cracks at the seam where the addition meets the original shell. Differential settlement or a tie-in that wasn’t engineered for Paradise’s expansive clay soils. Small seasonal movement is normal; a crack that widens month over month is not.
- Water staining or efflorescence on the addition’s interior walls after monsoon season. Usually a flashing or envelope detail that let wind-driven rain behind the panel system. Left alone, it turns into mold and rot in the framing.
- Doors and windows in the addition that stick or won’t latch. The room is moving. That’s a structural or foundation symptom, not a hardware problem, and it’s the one owners most often misdiagnose.
- Sagging roofline or a spongy feel in the addition floor. Undersized framing or a foundation that’s settled past what the tie-in was designed to absorb. This is the point to stop using the space and get it looked at.
- An ADU that never passed final inspection, or a stalled permit. Common with owner-built or half-finished projects. It can usually be brought to compliance, but it takes documentation and a real scope, not a patch.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Paradise, here’s what typical scope runs, installed and finished, with the written price confirmed before we start:
| Project | Installed Price Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
The range is driven by square footage, foundation requirements (desert soil prep varies a lot by lot), whether you’re tying into an existing Dvele panel system or building new, and your finish level. Permits and inspections are pulled and passed as part of the job, not left to you. Line items are transparent, labor is broken out from materials, and the number on the invoice is the number you approved. The 365-Day Done Right Promise covers the work after it closes: if it’s not done right, we make it right.
DIY or Call Us?
Be honest with yourself about this one. You can safely check for water intrusion, note where cracks are and whether they’re growing, measure door and window gaps, and pull your permit records from the county. That’s the useful reconnaissance.
What you shouldn’t touch: the structural tie-in, foundation work, roof framing, and anything involving cutting into the original Dvele panel system. That’s not a weekend project. An addition that moves under you fails in ways that put the whole house at risk, and the fix always costs more than getting it engineered from the start. If your addition or ADU is showing any of the signs above, call us at (866) 977-0526 and we’ll tell you straight what needs doing and what it costs.
FAQs

A properly engineered addition or ADU built to Dvele’s structural spec should last the life of the home, easily 30-plus years. The variable is the envelope and foundation work: done right for the desert climate, it holds; shortchanged, you’ll be chasing cracks and water within 5 to 10 years. Call (866) 977-0526 for a free assessment of what you have.
Often yes, and it’s usually worth pricing both. Cracked tie-ins, failed flashing, and settling foundations can be corrected with structural repair and foundation work, which runs far less than a rebuild. Total structural failure is the exception, not the rule. Call (866) 977-0526 for a free estimate, and we’ll show you the repair scope with a written price.
A garage conversion typically runs several weeks to a few months; a full addition or ADU is a longer project that depends on size, permits, and site work. No one builds an ADU in a day, and anyone quoting you a same-week turnaround isn’t telling the truth. Live arrival times and before-and-after photo updates run throughout, so you’re never guessing where things stand.
Structural components get matched to your model’s original engineering spec, and finish materials come from established brands with manufacturer backing, including KraftMaid and Cambria, so you’re not guessing at quality. We don’t carry stock or claim to be Dvele; we source to spec for your project. Call (866) 977-0526 and we’ll walk you through the parts and finishing options for your build.
Whether you’re finishing an addition you inherited from the last owner or planning a brand-new ADU, Sawyer Remodeling Paradise is here to put a written price in your hands before any work starts. Call (866) 977-0526 for a free estimate.
Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.












