







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mighty Buildings Home Additions & ADU: The Paradise Owner’s Guide
Mighty Buildings prefab additions and accessory dwelling units can be repaired, reconfigured, and finished by an independent contractor, and most of the work we handle in Paradise falls between $45,000 and $130,000 for an addition and $90,000 to $220,000 for a finished ADU. We are not affiliated with Mighty Buildings; we’re an independent general contractor that services the panels, connections, finishes, and site work around their structures. Homeowners usually find us after a panel seam opens in the wind, a connection point leaks, or they need the unit turned into a livable space with real plumbing and electrical roughed in.
Key Takeaways
- Addition work in Paradise typically runs $45,000 to $130,000; full ADU construction runs $90,000 to $220,000.
- Mighty Buildings panels are factory-made, but the site connections, utilities, and finish-out are where problems live.
- No part is carried on a truck. We source the right component after measuring what’s actually on your unit.
- Written price before work starts, background-checked uniformed technicians, 365-Day Done Right Promise on every job.
Which Mighty Buildings Models This Applies To

Mighty Buildings has produced panelized and 3D-printed structures across a few product lines, and the differences matter for how additions and ADUs get attached and finished. The panel system on earlier studio and one-bedroom units uses a different joint profile than later units, so a connection kit that fits one will not seat cleanly on the other. Before we quote anything, we measure the panel thickness at the connection point and photograph the existing utility stub-out locations. That’s the compatibility check that prevents a wrong-part install.
How to identify what you actually have
- Find the compliance label or data plate on the unit. Mighty Buildings units carry identification tied to the model and manufacturing batch.
- Measure the panel face-to-face gap at a corner: different production runs vary by a fraction of an inch, and that fraction decides whether a joint seal seats flush or needs a filler strip.
- Check the utility stub-outs. A 1-inch service line versus a 3/4-inch line changes the entire connection assembly.
For Mighty Buildings specifically, the OEM-versus-aftermarket decision usually favors OEM for structural connection hardware and gaskets, and quality aftermarket for finish materials, fixtures, and surface products. We work with KraftMaid and Cambria on interior finishes where a homeowner wants cabinetry and counters built to match the rest of the house, and we can source Silestone when a client prefers that surface. The point is matching spec, not brand loyalty.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mighty Buildings Home Additions & ADU Is Failing
- Panel seam gaps that open after wind events. The gasket or sealant at the joint has aged out or the fastener tension has loosened. Desert wind driven through that gap brings grit that widens it further.
- Water staining at connection points. The flashing or seal at a site-built attachment has failed, letting monsoon rain wick behind the panel. This shows as staining or bubbling on interior finishes near the joint.
- Uneven floor or door that no longer closes. The shimming or foundation interface under the unit has settled. Prefab footings on Paradise’s caliche-heavy soil can shift if the original base prep didn’t account for it.
- Utility stub-outs that hiss, trip, or drip. The site-connection hardware at a plumbing or electrical feed has degraded. A tripping breaker or a slow drip at a feed line points to a connection that needs re-sealing or replacing.
- Interior moisture or a musty smell. Without a working vent or vapor path, condensation builds inside a prefab unit quickly in the Nevada heat. This points to a finish-out or ventilation gap, not the panel itself.
Replacement Cost & What’s Included

For addition work in Paradise, installed costs land between $45,000 and $130,000. A finished ADU runs higher, from $90,000 to $220,000, because you’re adding a full kitchen, bath, and separate utility service. What drives the range: the size of the addition, whether the site connection points need re-engineering, the finish level you choose, and the permit and inspection work for your parcel. Garage conversions to living space fall between $30,000 and $80,000 if that’s the path you’re considering.
We put a written price in your hands before any work starts, line-item breakdown included, so the number on your invoice is the number you approved. No change orders stamped on at the end. Every job carries the 365-Day Done Right Promise: if it’s not done right, we make it right, in writing. That includes a free second visit if the repair fails.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
An owner can safely check some things. Look for visible gaps at panel seams, photograph water staining near joints, confirm that doors and windows still square up, and note which utility feeds are dripping or tripping. Stop there for anything involving the electrical service, gas connections, or structural fastening. Building a water-tight, wind-rated connection between a prefab panel and a site-built structure requires proper fasteners, correct flashing sequence, and a torque spec you can’t eyeball. Getting that wrong in Paradise’s wind and monsoon pattern means water intrusion you won’t find until damage is already behind the wall. For anything past a visual check, call us. Estimates are free, and the price is written before work starts.
FAQs

A well-sealed Mighty Buildings connection should last well beyond a decade with proper maintenance. The harsh part is Paradise’s climate: afternoon sun pushing 110 degrees, wind-driven grit at seams, and monsoon rain beating on the same joints. Seals at connection points need an inspection every few years, not every few months.
Often, yes. Most seam and connection problems are a reseal or re-fastening job rather than a panel replacement, and we’ll tell you which you actually need after we inspect. If the structural hardware itself has failed, that’s when replacement makes sense. We quote repair first. Call (866) 977-0526 for an exact quote, and the estimate is free.
A finish-out or connection repair can be measured in days to a few weeks. A full addition or ADU is a permit-and-build timeline that runs longer, and we schedule a live arrival time and before-and-after photo updates so you know where things stand every step. We don’t promise same-day on a build, and we won’t. Call (866) 977-0526 and we’ll map the schedule for your Paradise property.
We measure what’s on your unit and source to that spec, not to a guess from a photo. That means identifying the model and production run, checking the panel thickness and utility stub-outs, then ordering structural connection hardware to match. We don’t keep a general stock of Mighty Buildings components on a truck. Call (866) 977-0526 to start the measurement and quote.
Get Your Written Price Before Work Starts
If your Mighty Buildings addition or ADU needs a repair, a finish-out, or a full build in Paradise, call (866) 977-0526 for a free estimate. We’ll measure the unit, confirm what fits, and hand you a written price before a single tool picks up. Background-checked uniformed technicians arrive with a live arrival time and photo updates start before and after, and every job is backed by the 365-Day Done Right Promise.
Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.












