







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Paradise Homeowners Choose Mr-Glass Construction
Sawyer Remodeling Paradise is an independent Mr-Glass construction service provider working throughout Paradise, NV. We install, repair, and rebuild Mr-Glass frameless shower enclosures, sliding shower doors, custom mirror and wall glass, and storefront glass units. What sets our Mr-Glass work apart is hard-water and desert-heat experience: we know how Mr-Glass glass and hardware actually behave in Paradise’s calcium-heavy water and 110°F+ summers, and we quote the fix in writing before any work starts. We are not authorized, sponsored, or endorsed by Mr-Glass. Call (866) 977-0526 to schedule your free estimate.
Why Trust Sawyer Remodeling Paradise for Your Mr-Glass Construction?

Our technicians have up to 21 years of experience, and a good share of that has been spent on Mr-Glass products specifically. That means we don’t learn your enclosure on your dime. We recognize Mr-Glass frameless hinge sets on sight, know which roller assemblies belong on which semi-frameless sliding track, and understand how Mr-Glass tempered panels are drilled, edged, and set so the glass stays sound through the install.
We also work warranty-safe. When a Mr-Glass unit is still under a manufacturer warranty, we document what we find and avoid practices that would void coverage – no substituting undersized hardware, no drilling new holes in tempered panels, no sealing over failed seals. We use OEM-compatible parts wherever they exist and match thickness and temper requirements on every replacement component.
All of this runs under The Relay Visibility Guarantee: a written price before work starts, a live arrival time, and before-and-after photo updates. Background-checked, uniformed technicians show up, and calls are answered by a live person 24/7. Every job carries the 365-Day Done Right Promise – if it isn’t done right, we make it right, in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Fix in Paradise
Mr-Glass products are solid, but Paradise’s water and climate work on them hard. These are the issues we see most.
- Hard-water mineral spotting and etching on shower glass. Paradise’s calcium-heavy water accelerates spotting and, over time, actual etching that clouds the glass. Homeowners usually notice it on the fixed panel first, where spray sits longest. Once etching reaches the glass surface, polishing helps but rarely restores full clarity – that’s when panel replacement makes more sense than another round of cleaning products.
- Roller and track wear on semi-frameless sliding shower doors. The rollers flatten and the track accumulates mineral grit, so the door starts binding, jumping the track, or hanging up halfway. When it drags, the bottom sweep stops sealing and water leaks onto the curb. New rollers and a cleaned, re-aligned track usually solve it without touching the glass.
- Seal and caulk failure around frameless enclosures. Clear seals harden and shrink under desert heat cycling, and the caulk line at the wall and curb opens up. Moisture then tracks behind tile and framing. This is the failure most worth catching early – it’s cheap to re-seal and expensive to repair once water has been sitting behind the wall.
- Door-closer and hinge fatigue on glass door units. Hinges and closers on Mr-Glass swinging doors carry real weight, and after years of daily use they sag, the door no longer closes flush, and the panel can sit out of square. Matched replacement hardware restores the swing.
- Edge-chip damage from impact during remodels. Tempered glass edges are the weak point. A bumped corner during a bathroom tear-out can chip an edge, and a chipped edge on tempered glass is a failure waiting to happen. Chips near hinges or clamps mean the panel should be replaced, not cosmetically patched.
A common Mr-Glass scenario is a frameless shower enclosure where the swinging or sliding panel starts dragging and the bottom sweep no longer seals. It’s usually the rollers, hinges, and clear seals that have worn or hardened under hard water and daily use – not the glass itself. A qualified local pro typically inspects the glass edges and hinge points, replaces the worn hardware and seals with matched components, re-levels the enclosure, and re-caulks the wall and curb joints to stop water tracking behind the tile. In Paradise, that whole job often comes down to hardware and seals, and the original Mr-Glass glass stays.
Mr-Glass Parts & Our Repair-vs-Replace Approach

We use genuine OEM Mr-Glass hardware and seals where they’re available. For discontinued or hard-to-source components, we specify quality aftermarket equivalents that match the original thickness and temper requirements exactly. We don’t claim to keep Mr-Glass parts in local stock – parts are sourced per job, which means we quote the right component the first time instead of forcing a near-match.
The repair-or-replace call is where a lot of homeowners get pushed into a full replacement they didn’t need. Our rule is simple. When the hardware is failing but the glass is sound, a hardware-and-seal rebuild is usually the honest answer. When glass is chipped on an edge, etched beyond polishing, or the enclosure is out of square, replacement is the better value. We tell you which one you’re looking at, in writing, before anything comes off the wall. Call (866) 977-0526 for a free estimate.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We inspect glass edges, hinge points, rollers, tracks, sweeps, and caulk lines, then check the enclosure for level and square. We identify which Mr-Glass hardware is worn and whether the glass itself is sound.
- 2
Written scope and price. Before any work starts you get the fix in writing: which OEM or matched aftermarket parts, which seals, which panels are staying and which are going. You approve the number on paper.
- 3
Repair or install. We replace worn hardware and seals with matched components, re-level the enclosure, re-caulk wall and curb joints, and handle any panel replacement to Mr-Glass thickness and temper specs. Background-checked technicians, uniformed, with photo updates before and after.
- 4
Test and warranty. We cycle the door, check the sweep seals, and confirm no water tracks behind the tile. Then the 365-Day Done Right Promise goes on the job in writing, with a free second visit if the repair fails.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Paradise
We cover the Mr-Glass lines Paradise homeowners actually have in their bathrooms and commercial spaces: frameless shower enclosure systems, semi-frameless sliding shower doors, custom-cut mirror and wall glass panels, and storefront and patio door glass units. Within those lines we handle walk-in shower installation, tub-to-shower conversion, shower replacement, and full bathroom remodels where Mr-Glass glass is the centerpiece – plus tile and fixtures around it. If your unit is a series we haven’t listed, call and describe it; we’ll tell you honestly whether it’s in our wheelhouse.
We Also Service These Brands
Sawyer Remodeling Paradise isn’t tied to a single brand. Alongside Mr-Glass, we work with KraftMaid and Wellborn cabinetry, Cambria and Silestone countertops, Kohler and Moen fixtures, and GAF and James Hardie exteriors – name-brand materials with manufacturer backing behind the install. If your remodel mixes Mr-Glass glass with Cambria surfaces or Kohler fixtures, one crew handles the whole scope with a written price and photo updates throughout.
FAQs – Mr-Glass Construction Service in Paradise

Yes. Most Mr-Glass frameless enclosures can be repaired when the glass is sound and the problem is worn hinges, rollers, seals, or failing caulk. We rebuild the hardware and seals with matched components and re-level the enclosure, which is far cheaper than a full replacement. Call (866) 977-0526 for a free estimate.
Because the cloudiness is usually etched mineral damage, not soap scum. Paradise’s calcium-heavy water leaves deposits that bond to the glass surface, and once they etch in, no cleaner removes them. Polishing can improve mild etching; heavy etching means replacing the panel. Call (866) 977-0526 and we’ll tell you which stage you’re at.
If the glass is intact and the door only drags, jumps the track, or leaks at the bottom sweep, it needs new hardware – rollers, track, and sweep – not a new door. If the glass is chipped at an edge or the panel is out of square, replacement is the safer call. Call (866) 977-0526 for an honest assessment and a written price.
Often yes. Paradise is an unincorporated township without its own building department, so permits run through Clark County, and a tub-to-shower conversion that changes plumbing or framing typically needs one. We confirm the permit picture for your address before work starts. Call (866) 977-0526 to talk it through.
Here’s the Paradise range for the work we do around Mr-Glass glass:
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
Call (866) 977-0526 for an exact quote – estimates are free.
Not if it’s done right. Proper service with OEM or matched-compatible parts, correct temper and thickness, and no drilling into tempered panels keeps your warranty intact. We document what we find and follow warranty-safe practices on every Mr-Glass job. Call (866) 977-0526 to ask about your specific unit.
Book Your Mr-Glass Service in Paradise, NV
Whether your Mr-Glass shower door drags, your glass is clouding up, or you’re planning a walk-in shower install, we’ll put the price in writing before any work starts and keep you updated with photos throughout. Call (866) 977-0526 for a free estimate anywhere in Paradise.
Written by the team at Sawyer Remodeling Paradise.












