







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Fence Installation: The Paradise Owner’s Guide
PGT fence installation in Paradise typically runs $3,500 – $9,000 for a standard residential run, and most jobs are scheduled within a few days of your free estimate. That range covers materials, labor, and cleanup. The parts that matter most on a PGT system are the posts, rails, and panel fasteners, and when one of those fails, you’ll usually notice it as a sagging gate, a post that rocks when you lean on it, or a panel that pulls loose after a wind event in the foothills. Call (866) 977-0526 to schedule your free estimate, and we’ll give you a written price before any work starts.
Which PGT Models This Applies To

PGT builds fencing systems across several product lines, and the parts are not interchangeable between series. The two families Paradise homeowners ask us about most are the vinyl privacy panels and the aluminum ornamental runs. Vinyl posts and rails are sized by profile, and a post that looks the same from the outside can have a different wall thickness or a different internal channel. Aluminum systems use brackets and pickets sized to the specific rail height, and a bracket from one series won’t seat cleanly on another.
To match the right part, look for the model label on the inside face of a post or the underside of the top rail. If the label is gone, measure the outside post dimension, the rail height, and the panel width between posts. Those three numbers usually narrow it down to one product family. Aftermarket parts that meet the same profile work fine for most repairs and cost less than OEM. When a part is discontinued, the aftermarket equivalent is often the only honest option.
We’re an independent service provider and not affiliated with PGT. If you have the model label, we’ll match the part and confirm compatibility before we quote.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Fence Installation Is Failing
Paradise sits in high-desert country with alkaline soil and a sun load that wears materials faster than coastal climates. Vinyl that holds up fine near the ocean can get brittle and chalky here after 12 – 15 years of direct sun. We see the failure patterns below on a regular basis.
- Post rocking when you lean on it. The footing has loosened, often from soil movement or dry-season shrinkage around the concrete. This one gets worse fast and can take a panel down with it in a wind.
- Sagging gate. Hinge screws back out of aged vinyl, or the gate frame has flexed from weight it wasn’t sized for. Check the hinge plate first; if the vinyl around it is cracked, the post section is the real problem.
- Yellowing or chalking panels. UV exposure breaks down the surface resin. It’s cosmetic at first and structural later, when the panel gets brittle enough to crack at the fasteners.
- Loose or popped fasteners. Stainless screws back out of vinyl when the material expands and contracts through 40-degree temperature swings. A few loose screws are a quick fix; a whole run is a sign the fastening method wasn’t right for the material.
- Rails pulling out of post channels. The rail has shrunk or the channel bracket has failed. This is the failure that lets a whole section lean, and it’s the one we see most after a monsoon-wind day.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Fence installation in Paradise falls in the $3,500 – $9,000 range for a standard residential job. What moves you up or down the range is linear footage, post count, whether old fence and footings need removal, and gate hardware. A short run with sound footings and a reuse of existing gates lands near the bottom. A full replacement with new footings, a new gate, and haul-away of the old fence lands near the top.
Every quote is a written price before work starts. You’ll see line items for materials, labor, and disposal, and the number on the invoice is the number you approved. The work carries a 365-Day Done Right Promise: if it’s not done right, we make it right, backed in writing.
| Line item | Typical range (Paradise) |
|---|---|
| Vinyl fence installation | $3,500 – $9,000 |
| Aluminum fence installation | $4,000 – $10,000 |
| Post and footing replacement (per post) | Quoted by count |
| Gate rebuild or hardware swap | Quoted with the run |
DIY or Call Us?
You can safely check your own fence. Measure the post spacing, confirm the model label, tighten visible screws, and photograph the failed section. That information speeds up an estimate and costs nothing.
Where DIY goes wrong on a PGT fence is the footing. A post set in shallow concrete without the right depth and drainage will fail again within a season or two in Paradise’s soil, and the effort of digging out a bad footing is the whole job. Removing and resetting a run also involves levering panels and rails that can crack under load, and a fence panel falling the wrong way on a person or a window is a real injury risk. We’d rather you didn’t take that one on.
Call (866) 977-0526 for a free estimate. We’ll tell you honestly whether you need a part, a section, or a full run.
FAQs

Expect 15 – 20 years from a properly installed vinyl run and 20+ from aluminum in Paradise’s climate, with the sun and alkaline soil being the main wear factors. Post footings are usually what fails first, not the panels. Call (866) 977-0526 if you’re unsure how much life your current fence has left.
Yes, if the damage is limited to a few posts, a gate, or a single panel section. Full-run replacement only makes sense when the footings are failing across the line or the vinyl has gone brittle throughout. We’ll tell you which one you’re looking at, in writing.
A single-panel or gate repair is typically a half-day, and a full residential run usually takes 2 – 3 days depending on footage and footing work. We confirm the timeline in your written quote so you can plan around it.
We match the model label or on-site measurements to the correct PGT-compatible part, then source it from manufacturer-backed suppliers. We don’t carry parts on a truck or keep local stock, so we confirm availability before we schedule. If an OEM part is discontinued, we’ll present the aftermarket equivalent and let you approve it first.
We also install fencing alongside other exterior and interior work, with material partners like KraftMaid, Cambria, and Silestone available for the broader remodel.
Ready for a real number? Call Sawyer Remodeling Paradise at (866) 977-0526 to schedule your free estimate. You’ll get a written price before any work starts, a live arrival window on the day, and photo updates before and after.
Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.












