







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Kitchen Remodeling: The Paradise Owner’s Guide
PGT kitchen remodeling work in Paradise typically runs $14,000 to $45,000 installed, depending on cabinet layout, countertop material, and whether the plumbing or electrical has to move. We are an independent service provider, not affiliated with PGT, and we match the right components to your PGT kitchen products before any work begins. Homeowners usually find out something is wrong when a cabinet door stops closing flush, a counter seam starts catching a fingernail, or a drawer that ran smooth for years suddenly grinds every time it opens. In Paradise, that discovery often comes after a dry summer has pulled the cabinet boxes away from the wall a few millimeters. A written price lands in your hands before work starts, so the number on the invoice is the number you approved.
Key Takeaways
- PGT-compatible kitchen remodeling in Paradise runs $14,000 – $45,000 installed.
- Cabinet hardware, drawer glides, and door hinges are the parts that fail first, not the boxes themselves.
- Nevada’s low humidity swings are harder on wood cabinet frames than anything you’ll find on the coast.
- We source OEM or quality aftermarket equivalents, quote both, and let you decide.
- Free estimates, written pricing, and the 365-Day Done Right Promise on every job.
Which PGT Models This Applies To

PGT makes windows and doors, and many Paradise kitchens have PGT impact-rated windows or sliding glass doors installed alongside the cabinetry. The parts we replace most often in a PGT kitchen are the cabinet hardware, drawer slides, door hinges, and the trim and sealing around any PGT-impact window or door unit that opens onto the kitchen. PGT impact windows are common in Paradise because the whole region sits in a wind-borne debris zone, and that rating matters if you’re replacing a unit rather than repairing one.
To identify the right part, open the cabinet door and look for a manufacturer label on the inside of the door or the back of the box. On a PGT window or door, the label is usually on the frame jamb or etched into the glass corner. Write down the model number, the size in inches, and the hinge or glide brand before you call anyone. OEM parts come from the original manufacturer and match your existing profile exactly. Quality aftermarket equivalents from brands like Blum or Grass often cost 20% to 40% less and perform the same, but the mounting pattern has to match or the door won’t hang true. That’s the decision point for PGT kitchens: exact OEM match versus a proven aftermarket glide that fits the existing screw holes.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Kitchen Remodeling Is Failing
Hardware and glides fail before the cabinet boxes do. Here’s what tells you a part is on its way out:
- Doors that won’t stay shut or swing open on their own. The hinge spring has lost tension or the hinge plate has pulled out of the wood. In Paradise’s dry summers, the screw holes in cabinet frames enlarge as the wood shrinks, so hinges loosen faster than they would in a humid climate.
- Drawers that grind, stick, or fall off the track. The glide rollers or the track itself are worn. A drawer that jumps the track usually has a cracked nylon roller, not a bent slide.
- Cabinet doors that rub against each other. The hinges have shifted or the door has warped. Low seasonal humidity in Paradise causes solid-wood doors to move, and a door that fit perfectly in spring can rub by August.
- Countertops that rock or show a widening seam. The substrate or the seam adhesive has failed, or the cabinet box has pulled away from the wall. This one needs a professional look because a shifting counter can stress the plumbing connections underneath.
- Caulk or weatherstripping around a PGT window or door that cracks and lets air in. The seal has dried out. Impact-rated units need the right sealant, not a generic tube from the hardware store, or the weather rating is compromised.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what PGT-compatible kitchen remodeling runs in Paradise, line by line, so you can see where your money goes:
| Service | Installed Price Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: cabinet count and door style, countertop material (Cambria and Caesarstone cost more than a laminate, and the price reflects the slab), whether the plumbing or wiring has to move, and whether any PGT window or door unit gets replaced as part of the job. The price you get is written and itemized before any work starts. Labor and parts are shown separately so you can see exactly where the money goes. The 365-Day Done Right Promise covers the work for a full year after the job closes, and if a repair fails inside that window, we come back at no charge.
DIY or Call Us?
You can safely tighten a loose hinge screw, swap a drawer glide if the mounting holes match, and re-caulk around a kitchen window. Those are small, reversible jobs. Where DIY goes wrong in a PGT kitchen is when the part mismatch isn’t obvious: an aftermarket glide with a slightly different screw pattern splits the cabinet stile, or a new hinge pulls the door out of alignment and the whole run has to be re-hung. Countertop seams and any PGT window or door seal are not DIY territory. A failed impact-window seal compromises the wind rating, and a rocking counter can mask a slow plumbing leak. Call (866) 977-0526 and describe the part. We’ll tell you whether it’s a $15 fix or a job that needs a technician. Estimates are free.
FAQs

Cabinet hinges and drawer glides typically last 10 to 15 years under daily use, and a PGT impact window seal lasts 15 to 20 years before it needs replacing. Paradise’s dry summers and cool winters age wood frames and sealants faster than a coastal climate, so plan on checking hinges and caulk every few years rather than waiting for a failure. Call (866) 977-0526 for a free estimate if you’re not sure how much life is left in yours.
Often yes. A hinge that’s lost spring tension can be replaced on its own without touching the door, and a drawer glide can be swapped without pulling the whole drawer box. Countertops and failed window seals usually need replacement, not repair. We’ll tell you honestly which side of that line your job falls on, and the estimate is free either way. Call (866) 977-0526.
A hardware or glide swap takes 30 minutes to 2 hours for a set of cabinets, and a full kitchen remodel runs from a few days for a hardware-and-counter refresh to a couple of weeks for a full cabinet and counter replacement. We give you a live arrival time and photo updates before and after, so you know who is coming and when. Call (866) 977-0526 to schedule your free estimate.
We read the model number off your existing part or cabinet label, then quote both the OEM version and a quality aftermarket equivalent so you can compare price and fit side by side. We don’t claim to stock parts or carry them on a truck – each part is sourced to your job. We also work with KraftMaid, Cambria, and Silestone when a full cabinet or countertop replacement is the better call. Call (866) 977-0526 and we’ll walk you through the options.
Whether you need a single glide replaced or a full kitchen refresh, the first step is the same: a written, itemized price before any work starts, a live arrival time, and photo updates before and after. Call (866) 977-0526 to schedule your free estimate in Paradise. Our technicians have up to 21 years of experience, and every job carries the 365-Day Done Right Promise.
Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.












