







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sakrete Home Additions & ADU: The Paradise Owner’s Guide
We build and finish home additions and ADUs in Paradise using Sakrete structural concrete and mortar as the mix behind the structural layer – and installed work with that mix typically runs $45,000 – $130,000 depending on foundation depth, square footage, and finish level. If you already have a Sakrete product in the mix and something has gone wrong underfoot or at the joints, this guide tells you what to look for and what it costs to make right. Most Paradise owners discover trouble the same way: a hairline crack spreads across the slab within a season, a mortar joint at the block stem wall crumbles when they sweep, or new construction checks a floor that feels hollow and slightly sloped. That’s usually the Sakrete layer talking, not the porch paint.
Which Sakrete Models This Applies To

Sakrete is a brand of bagged mixes, so “model” means the exact bag type and formulation, not a serial number. The lines that matter for an addition or ADU foundation here are High-Strength Concrete Mix (fence posts and small slabs), Concrete Mix, Mortar Mix (Types N and S for blockwork), Sand Topping Mix, and Fast-Setting Concrete for post-and-beam footings. Complaints almost always trace to a wrong-formulation mismatch – a Type N mortar used where Type S was specified under a load-bearing stem wall, or a Fast-Setting bag poured into a cold, deep footing that never fully cured.
To match the right replacement, get three things off the original job: the bag label (product name and the strength spec printed on it), the date code stamped on the bag edge, and the actual pour footprint in inches. Measure, don’t estimate. A 4-inch slab spec and a 4.5-inch poured slab call for different bag volumes and different aggregate, and a Paradise HOA or county inspector will read the difference. For Sakrete specifically, the OEM decision is usually simple: because it’s a bagged commodity mix, a comparable quality branded concrete or mortar mix is functionally interchangeable when it matches the same PSI rating and formulation type – there’s no proprietary casting or housing to match, just the spec. Bring us the bag label and a photo of the pour and we’ll tell you honest what matches.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sakrete Home Additions & ADU Is Failing
- Cracking that keeps widening over weeks. Maps to shrinkage cracking when the original mix was poured too wet or cured fast in Paradise’s dry heat; if it runs deep and true, it’s a structural crack that points to an undersized or poorly compacted base.
- Hollow sound underfoot at new slab edges. Usually indicates a Sakrete pour that separated from the subbase – the mix cured before the base was properly dampened, leaving a void under a thin edge.
- Crumbling mortar joints in the stem wall. Points to a Type N mortar where the printed Type S spec was needed, or to a bag past its date code that lost bond strength before you used it.
- Efflorescence (white chalky salt) climbing the block work. Signals moisture wicking through a porous or low-strength mix; in Paradise’s alkaline desert soil, it can also mean the original pour lacked a proper moisture barrier.
- Sunken footing at a post or beam. Tells you a Fast-Setting footing under-poured or the hole was too narrow for the bag volume – the post settles and every framing line above it racks.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For reference on the full project: an addition in Paradise runs $45,000 – $130,000, a detached or attached ADU runs $90,000 – $220,000, and a garage conversion runs $30,000 – $80,000. When the failing part is the concrete or mortar layer itself, the repair or re-pour is scoped inside that range and priced as a line item so you can see it.
What drives the number up or down: foundation depth and soil prep on Paradise’s caliche-heavy ground, the square footage and slab thickness, whether blockwork needs Type S versus Type N, and finish level on the stem wall and slab edge. Parts and labor show up separately on the written quote – mix, rebar, vapor barrier, and the pour labor are each line-itemed. Every repair carries our 365-Day Done Right Promise, and if a repair fails inside that window we come back at no cost, as covered in writing. Call (866) 977-0526 for a free estimate before any work starts.
DIY or Call Us?
You can safely check a lot yourself: photograph the crack with a ruler for scale, note the bag label and date code, measure the pour, and look for efflorescence. Where DIY goes wrong is in the structural layer – cutting and patching a slab edge, re-pouring a footing, or rebuilding a load-bearing stem wall. Those are heavy, ground-tied work that can undermine the addition’s framing and fail an inspection if the mix, thickness, or compaction is even slightly off. If you’re unsure whether the crack is cosmetic or structural, that’s already our call. Call (866) 977-0526 and we’ll walk the site and price the fix, still for free.
FAQs

A correctly matched, properly cured Sakrete slab or mortar joint should hold 20 to 30 years or more in a dry desert climate. In Paradise the enemy is drying too fast in summer heat and highly alkaline soil at the base; both shorten the lifespan, so pour timing and moisture control matter more here than in wetter climates. Call (866) 977-0526 if your slab is showing early cracking – estimates are free.
Yes, in many cases a failed layer can be patched or resurfaced rather than fully replaced. Shallow shrinkage cracks and surface wear usually take a topping repair; deep structural cracks, sunken footings, and crumbling load-bearing mortar joints need more serious work. We’ll tell you honestly which one you’re looking at. Call (866) 977-0526 for a repair quote.
Not same-day – concrete and mortar repair is curing time, not a quick swap. A surface patch might take a day of work, while a footing re-pour or stem wall section is typically several days weather and cure included in Paradise’s heat. The full scope shows up in your written price before work begins.
We match the exact bag type and formulation off your label and pour spec, then buy from a local supplier that stocks current-date product. Because it’s a commodity mix, a comparable quality branded concrete or mortar of the same PSI rating is the accepted equivalent when the exact Sakrete line is short. Call (866) 977-0526 and we’ll confirm what fits your pour.
If a Sakrete-mix foundation on your addition or ADU is cracking, settling, or crumbling, get a written price before anyone picks up a tool – that’s how Sawyer Remodeling Paradise runs every job, backed by the Relay Visibility Guarantee and the 365-Day Done Right Promise. We also handle material sourcing from KraftMaid, Cambria, and Silestone across the full remodel. Call (866) 977-0526 for a free estimate in Paradise.
Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.












