







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Kitchen Remodeling: The Paradise Owner’s Guide
We install Schluter-compatible kitchen remodeling in Paradise, with full kitchen remodels typically running $14,000 – $45,000 and smaller scope work from $9,000 – $20,000. Schluter dominates the waterproofing and edge-trim side of a kitchen: Kerdi-Board and Kerdi-Fix at wet walls, Ditra under tile floors, and Schluter edge profiles where tile meets cabinets and floor. “Failure” here is rarely a shattered product. It’s a membrane that lifted at a corner, a trim leg that cracked at a doorway, or thinset that let go along a backsplash seam. Owners usually spot it as a hollow tap under a tile edge, a dark stain line on the cabinet face below the counter, or grout cracking in the same spot every season.
Which Schluter Models This Applies To
Schluter parts look interchangeable and aren’t. The family matters more than the length printed on the box. Kerdi-Board comes in thicknesses of 1/2″, 5/8″, and 2″, with the 2″ panel reserved for curbs and benches; grab the wrong thickness and your finished wall plane shifts. Schluter-SHOWER and Kerdi-Line are drain and shower systems that shouldn’t appear in a kitchen plan at all, so if a supplier is quoting them for a kitchen backsplash, that’s a red flag. Ditra and Ditra-Heat are floor underlayments, and they use different thinset (unmodified over Ditra, modified over concrete in some builds). Profiles are where people misfire: Schluter-Quadec is a 7/16″ rounded edge, Jolly is a 3/8″ L-angle, Rondec is a 5/16″ radius, and RENO-RAMP is the 1/2″ sloping edge for transitions to lower floors. Measure the finished tile edge, not the substrate. On OEM versus aftermarket: Schluter’s own profiles are the standard, and the aftermarket clones we’ve pulled off failed jobs are thinner aluminum, with thinner fleece on the Ditra-style mats. For a Paradise kitchen that gets sand tracked in daily, we recommend the brand-name sheet and profile. Full-disclosure: Sawyer Remodeling Paradise is an independent service provider, not affiliated with Schluter.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Kitchen Remodeling Is Failing
Here’s what a failing Schluter install actually looks like in a Paradise kitchen:
- Hollow tap along a Kerdi seam. The fleece overlap didn’t bond because the thinset skimmed over in dry heat before the fleece was pressed in. Once the corner lifts, water tracks behind the tile at the first splashed sink.
- Dark line on the cabinet face below the counter edge. A drip edge or Quadec leg is sitting proud of the tile, and water runs down the back of the profile into the cabinet. That’s a moisture problem the cabinet finisher can’t fix.
- Cracked trim leg at a doorway or appliance opening. Movement in the cabinet run, not the trim, is usually the cause. Thin aluminum profiles crack instead of flexing.
- Grout cracking in the same joint every season. A subfloor that moves under a Ditra mat that wasn’t fully bedded. The mat is supposed to isolate movement; if the thinset bond is poor, it doesn’t.
- Loose Ditra under a kitchen island or fridge bay. Heavy point loads on a mat that wasn’t rolled and pressed into wet thinset. Once it debonds, the tile above it starts tenting.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here are the installed ranges for Paradise, so you can tell whether your job is in the ballpark before you call. These are the numbers we work to on every written quote.
| Scope | Installed range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Backsplash installation (with Schluter trim and waterproofing) | $800 – $2,500 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Kitchen island installation | $3,000 – $10,000 |
What moves the range: the size of the tile field, whether the existing membrane has to come up (a full Ditra removal can add a day and disposal), cabinet removal and reinstall around a backsplash, and whether the counter has to come out to redo a wet wall. Parts are itemized on the quote – the mat, the profile, the thinset, and the labor are listed as separate lines, so you can see exactly what a Kerdi-Board sheet versus an L-angle costs. Every installation is backed by the 365-Day Done Right Promise, and a written price is in your hands before any tile is pulled.
DIY or Call Us?
There’s a safe half and an unsafe half. Safe to check yourself: tap the tile field with a plastic handle to find hollow spots, run a finger along the profile edge at a doorway to feel for a proud leg or a lift, and drop a small level on the floor grout to see if a joint is cracking uniformly. Unsafe DIY: pulling tile off a Kerdi-Board wall to inspect below it, which destroys the fleece and the waterproofing layer in one move. The recessed tile-over-wet-wall jobs are where owners get into trouble. Replacing a profile with the wrong dimension leaves a lip that catches water; replacing a Ditra mat without fully bedding it guarantees the same failure in 18 months. If a tile sits over an electrical outlet, a sink supply line, or a dishwasher circuit, stop and call us. You can reach a live person 24/7 at (866) 977-0526.
FAQs

A properly installed Schluter membrane and profile set typically holds 15 to 25 years in a Paradise kitchen, though interior failures show up earlier – often within 2 to 5 years – when the thinset bonds poorly. Desert heat and low humidity are hard on thin-set cure times; the fleece has to be pressed in before the mix skims. Call (866) 977-0526 for an exact assessment on your floor or wall.
Yes, in many cases – a single lifted Kerdi seam or a cracked profile leg can be repaired without pulling the whole tile field, if the bond around it is still solid. We test the surrounding area, cut back only the failed section, and re-set the membrane and trim. If more than about a third of the field is hollow, a partial re-tile is cheaper than chasing failures. Estimates are free.
A backsplash section with a profile replacement runs 1 – 2 days; a kitchen floor with a Ditra mat replacement can take 3 – 5 days depending on square footage and whether the cabinets come out. We give you a written schedule before the job starts and track the arrival window live so you’re not sitting in a four-hour hold. Call (866) 977-0526 for a scope timeline.
We source Schluter profiles and membranes through verified distributors and confirm the dimensions against your existing installation before ordering – no guessing that a Quadec 7/16″ is the same as a Jolly 3/8″. The written price shows the part and the labor as separate lines, so you see exactly what the material costs. We don’t stock parts on trucks or in a warehouse; we order to spec after inspection. Call (866) 977-0526 to schedule the free estimate.
If you’re looking at the same cracked grout joint or a hollow tap under a Kerdi edge, the fix is best handled while the surrounding tile is still sound. Call (866) 977-0526 to schedule your free estimate – a written price lands in your hands before any work starts, and our technicians have up to 21 years of experience with Schluter systems and the KraftMaid, Cambria, and Silestone products that surround them.
Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.












