







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Driveway & Pavers: The Paradise Owner’s Guide
We install and restore Sterling-compatible driveway and paver systems in Paradise at a typical installed cost of $7,000 – $18,000 for a full paver driveway, and smaller repairs on a failing section usually land well under that. Most Paradise owners don’t find out something’s wrong until the symptom shows up: a paver that heaves after a wet winter, a rut where the car always parks, or sand washing out at the apron where the driveway meets the street. That’s the moment a driveway goes from background to a phone call.
This guide is for the owner who already has a failing section and wants the part matched to their Sterling system, priced in plain dollars, and put in right. We work as an independent installer of Sterling-compatible driveway and paver products. We’re not affiliated with Sterling, and we don’t claim to be. What we do is know how these systems go together in Paradise soil and heat, and quote you a written price before anything starts.
Key Takeaways
- Full paver driveway install in Paradise runs $7,000 – $18,000; a single failed run or apron repair costs far less.
- The part that fails first in Paradise is almost always the base and joint sand, not the paver itself.
- We write the price before work starts and back the install with our 365-Day Done Right Promise.
Which Sterling Models This Applies To

Sterling driveways and paver systems vary by series, and the piece that matters here is the paver unit plus its bedding and jointing spec. The most common confusion we see in Paradise is mixing paver thicknesses. Sterling’s pedestrian-rated pavers (the 60mm family) and the heavier vehicular-rated units (80mm and up) don’t interchange on a driveway. If you swap a 80mm unit for a 60mm one, or fill a run with the wrong thickness, the surface sits uneven and water pools in the joint line within a season. The quickest way to identify yours is to measure the paver edge at an exposed corner where sand has washed out, and check the underside profile at any piece that’s already lifted.
On the OEM-versus-aftermarket decision: for Stirling-style pavers, a quality aftermarket unit in the same thickness, color family and compressive range is a fair match and often the practical choice, especially for a repair run. What you shouldn’t do is mix an off-spec aftermarket unit into a Sterling field just to save a few dollars a square foot; the color and edge bevel won’t match and the joint widths drift. When we quote you, we tell you which pavers we’re specifying and why, so there’s no mystery supplier behind the install. If your driveway also touches a patio, that scope is a separate conversation – paver patio runs $3,500 – $11,000 in Paradise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Driveway & Pavers Is Failing
Paradise’s heat and occasional hard rain work on these systems in specific ways. Here’s what to watch for, and what’s usually underneath each symptom.
- Heaving after a wet stretch. A section lifts or rocks because water has gotten under the base and the bedding has softened. Once the base is saturated, no amount of sand on top fixes it; the failed base has to be re-graded and re-compacted in Paradise or it comes right back.
- Sand washing out of the joints. You’ll see lines that stay empty and loose after sweeping. That’s joint sand loss from runoff or a low spot that drains toward the house instead of away, and it lets pavers shift.
- Sunken ruts where tires sit. Repeated loading on a thin base or an uncompacted layer shows up first where the car parks. In a Paradise driveway with slab-heating sun, compaction done wrong the first time surfaces fast.
- Separating edge or shifted border. The paver restraint (the edge strip) has come loose or the base behind it has failed, letting the field spread outward.
- Color and surface wear on older units. Faded or spalled top faces mean the paver itself is at end of life, not a joint problem, and it’s a straight replacement question.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the priced picture in Paradise, and what drives the number. The big range on a full driveway comes from square footage, whether we’re tearing out and re-basing or setting over a sound base, and the paver line you pick. A sealing refresh, for comparison, is $250 – $700.
| Project | Installed price range |
|---|---|
| Paver driveway install | $7,000 – $18,000 |
| Concrete driveway install | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio install | $3,500 – $11,000 |
What’s included with us: the written price before a tool comes out, a breakdown of parts and labor so you can see where the money goes, and a background-checked, uniformed technician on the job – you know who’s showing up before they arrive. The work carries our 365-Day Done Right Promise, and there’s a free second visit if a repair fails. Calls are answered by a live person around the clock, so you’re not chasing a callback. That pricing transparency is the whole point of no-hassle upfront pricing on every project.
DIY or Call Us?
Some of this you can safely check yourself. Walk the driveway after rain, sweep sand and watch whether joints refill, lift an already-loose paver and feel the bedding underneath for softness, and eyeball the edge strip for separation. What goes wrong when owners DIY is the fix, not the diagnosis. Most people top off with sand, tamp a lifted paver back down, or set a paver onto a wet, unstable base. That looks right for a few weeks, then fails again because the base problem was never solved – and in Paradise’s cycle of hot sun and heavy rain, a soft base shows up fast. Base excavation, re-compaction and re-setting a field correctly isn’t a weekend job, and a half-done repair on a driveway edge can send water toward the house. If you’re not sure, call and we’ll tell you straight.
Reach us at (866) 977-0526 to schedule your free estimate – the price is in writing before work starts.
FAQs

How long does a Sterling driveway or paver system last in Paradise? A correctly installed paver driveway with a proper base and joint sand commonly holds its surface for decades in Paradise, with joint sand refreshes and periodic sealing as maintenance; the failure point is almost never the paver, it’s the base and joints under it.
Can the failing section be repaired instead of replaced? Yes, in most cases a failed run, apron or sunken section can be re-based and re-set as a repair rather than a full replacement, which is why we quote repairs and full installs separately. Call (866) 977-0526 for an exact quote; estimates are free.
How long does it take to swap in the part? A single failed run or border repair is typically finished in a day, while a full paver driveway install takes several days depending on square footage and base work. We’ll give you the schedule in writing with your price.
How do you source the part? We match your Sterling-compatible paver by thickness, color family and profile, and specify the unit in your written quote – either an OEM-spec paver or a quality aftermarket equivalent that won’t throw off the field’s color or joint widths. We don’t claim to carry parts on a truck; the right unit is specified and ordered for your job, and we also work with other brands like KraftMaid, Cambria and Silestone on the remodel side.
When you’re ready, call Sawyer Remodeling Paradise at (866) 977-0526 for a free estimate. You’ll get a written price before work starts, a live arrival time, and photo updates before and after – all part of The Relay Visibility Guarantee. Estimates are free, and picking up the phone to know your ballpark is the right first step.
Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.












