







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Home Additions & ADU: The Paradise Owner’s Guide
We plan, permit, and build home additions and accessory dwelling units that pair cleanly with Therma-Tru entry and patio door systems, and in Paradise homeowners typically invest $45,000 – $130,000 for a home addition and $90,000 – $220,000 for a full ADU. It’s a construction schedule, not a same-day fix: a permitted addition runs months, and an ADU runs longer. Most Paradise owners don’t arrive here because a part “failed” in the way a spring or hinge fails. They arrive because a door they love, usually a Therma-Tru fiberglass or steel entry, is already in the house and they want it carried into a new sunroom, casita, or detached unit without the finish and hardware changing. That’s a compatibility and specification job, and it’s the one we get called about most in Paradise.
Which Therma-Tru Models This Applies To
Therma-Tru builds entry doors, patio sliders, and sidelite systems, and the reference you need is stamped on the door itself, not on your memory of the paperwork. Look on the hinge jamb (the vertical frame piece the hinges screw into) for a model or series label, and measure the actual slab: a standard entry is 36 by 80 inches, but rough openings in additions need to be framed off the unit’s specific rough-opening spec, not a guess. Fiberglass and steel lines each carry their own trim and threshold options, and a sidelite or transom adds width you have to account for before framing. Here’s the decision that matters: for a new addition in Paradise, buy the door as new OEM so the manufacturer warranty transfers and the finish matches; for reusing an existing Therma-Tru door in a new wall, we inspect the slab for delamination and rehang it with fresh hardware. We’re an independent remodeler, not affiliated with Therma-Tru, so we source to your door, not the reverse.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Home Additions & ADU Is Failing
For a part attached to an addition, “failing” usually means the door and the new construction are fighting each other. Watch for these:
- A door that sticks seasonally. In Paradise’s swings between dry heat and monsoon humidity, a slab swells and shrinks enough to bind. That’s usually frame settling or a threshold set too high, not a defective door.
- Water staining at the threshold or sidelite base. Desert sun bakes the weatherstripping and sealant until it cracks. Water finds the gap at the bottom corner first, and a fiberglass door can hide early rot behind its finish.
- Daylight or a draft around the frame. New framing that shifts a quarter-inch throws the door out of square, and no amount of adjustment fixes a frame that was never plumb.
- Fogged or cloudy glass in a patio slider. The seal on the insulated glass unit has failed, which is common after years of hard UV in Paradise. The door body is fine; the glass unit is what gets replaced.
- Hardware that loosens or won’t latch. A strike plate that drifts out of line points to settling, not a worn latch. Fix the frame and the latch lines back up.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

On a home addition in Paradise, the door and its hardware deserve their own line on the bid so you can see exactly what you’re buying and what’s included.
| Scope | Typical Range (Paradise) |
|---|---|
| Home addition (permitted, with Therma-Tru entry) | $45,000 – $130,000 |
| ADU construction (full unit) | $90,000 – $220,000 |
| Garage conversion to living space | $30,000 – $80,000 |
The range moves on foundation type, roof tie-in, how much plumbing and electrical you’re extending, and the door line you choose. A single Therma-Tru entry versus a slider with sidelites and a transom changes both the door cost and the framing around it. You get a written price before work starts, so the number on the invoice is the number you approved. Our technicians have up to 21 years of experience, and the work carries our 365-Day Done Right Promise: if it’s not done right, we make it right.
DIY or Call Us?
You can safely check a few things yourself: confirm the model label on the hinge jamb, measure the slab width and height, note whether the door is fiberglass or steel, and photograph any rot at the sill. Those details make a real difference in getting an accurate bid. Where DIY goes wrong is the structural side. Cutting a door opening into a new wall means knowing the load path, the header size, and where the rough opening has to sit. Move the frame a half-inch and the door binds for the life of the addition. Get the flashing or threshold wrong in Paradise and water gets in during the first monsoon. None of that is a job for a homeowner with a reciprocating saw. Call (866) 977-0526 and we’ll talk through your door and your project.
FAQs

A Therma-Tru fiberglass entry typically holds up well for 15 to 20 years or more in this climate; the finish and weatherstripping are what wear first, not the door body. UV and dry heat break down sealant faster than most places, so plan on resealing the sill and checking weatherstripping every few years. Call (866) 977-0526 if you’re unsure whether your door can go into a new addition as-is.
Often yes. Binding, sticking, and misaligned latches are usually frame adjustments, and a fogged insulated glass unit in a patio slider can be replaced without a whole new door. Full replacement makes more sense when the slab itself has delaminated or the frame is water-damaged. Call (866) 977-0526 and we’ll tell you honestly which one you’re looking at before you spend anything.
The door install itself is a single day, but it happens in sequence: framing, rough opening, then setting and flashing the door, then trim and finish after the walls close in. The whole addition is a months-long permitted project in Paradise, and the door is one stage of it. Call (866) 977-0526 for a schedule based on your actual scope.
We match the door to your spec sheet and your existing doors, order the correct model and finish, and confirm the rough-opening dimensions before framing. Because we’re independent and not tied to one supplier, we order what your project needs rather than pushing a set model. We also handle KraftMaid, Cambria, and Silestone selections on the interior side. Call (866) 977-0526 to start with a free estimate.
Whether you’re planning a sunroom off the back patio or a full detached casita, the right door spec decided up front saves you a rework later. Call (866) 977-0526 to schedule your free estimate in Paradise, and you’ll get a written price range for your addition or ADU before anyone picks up a tool.
Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.












