







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Windows & Doors: The Paradise Owner’s Guide
We install Tremron-compatible windows and doors for Paradise homeowners, and most full replacements land between $4,500 and $15,000 depending on how many openings you’re doing and whether you go impact-rated (which runs $8,000 to $25,000). Single failed parts – a balance, a sash lock, a roller assembly, a weatherstrip seal – are usually a much smaller job, often handled in one visit once we’ve matched the part to your unit. Most Paradise owners find us the same way: a window that won’t stay up, a slider that grinds on its track, or a door that leaks air around the frame during a summer wind event, and suddenly the part they ignored for two years is the only thing they can think about.
Which Tremron Models This Applies To

Tremron window and door hardware isn’t universal. The balance assemblies on their single-hung and double-hung vinyl lines changed profile sometime in the mid-2010s, and a replacement balance from an older unit won’t seat correctly in a newer sash – it’ll fit loosely, then fail again within a season or two. Before we quote anything, we pull the manufacturer label from the top or side of the sash channel (it’s usually a small silver sticker with a model code) and measure the visible glass and frame dimensions ourselves. If the label is gone, which happens often in Paradise after a few summers of sun exposure, the measurements and a photo of the hardware are usually enough to identify the series.
Then comes the OEM-versus-aftermarket call. For Tremron specifically, we lean OEM on balance systems and sash locks because the tolerances are tight and aftermarket copies tend to run slightly undersized. For rollers, weatherstrip, and screen hardware, a quality aftermarket equivalent is often just as good and costs less. We’ll tell you which category your part falls into before you commit to anything. We’re an independent service provider and not affiliated with Tremron – we source parts through authorized channels and match them to your specific unit. We also work with KraftMaid, Cambria, and Silestone on the interior side of these projects.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Windows & Doors Is Failing
- The sash won’t stay up, or slams down. That’s a failed balance spring or a broken balance shoe. On Tremron double-hungs, the balance is the first thing to go in a hot climate because the constant expansion and contraction wears the spring housing.
- A grinding or scraping sound when you slide the door. Worn rollers or a track that’s collected grit and grit-welded itself to the wheel. In Paradise, windblown dust settles into door tracks faster than most homeowners expect, and it acts like sandpaper on the rollers.
- You can see daylight around the frame, or feel a draft. Failed weatherstrip or a sash that’s shifted out of square. This one shows up on your power bill before you notice it visually.
- The lock won’t catch, or the window won’t latch flush. A misaligned sash lock or a keeper that’s worked loose. Left alone, it becomes a security gap and a water intrusion point.
- Fogging between the panes on an insulated unit. A failed seal in the glass unit itself. That’s not a hardware swap – it means the insulated glass unit needs replacing, and we’ll tell you honestly when that’s the case.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what Paradise homeowners actually pay, installed:
| Job | Installed Price Range |
|---|---|
| Single part replacement (balance, lock, roller, weatherstrip) | $150 – $450 typical |
| Window replacement (per opening, standard) | $4,500 – $15,000 project range |
| Impact window installation | $8,000 – $25,000 |
What drives the range: the number of openings, whether the frames are sound or need reframing, impact rating requirements, and whether we’re matching an older Tremron profile that needs custom sourcing. Your written price arrives before any work starts, parts and labor itemized, so there’s no surprise on the invoice. Every job is backed by our 365-Day Done Right Promise, and if a repair fails we come back at no charge.
DIY or Call Us?
Some things you can safely check yourself: clean the door track with a vacuum and a damp cloth, tighten visible screws on a loose sash lock, and look for the manufacturer label so you have the model code ready. What we’d steer you away from is replacing a balance assembly or pulling an insulated glass unit yourself. Window balances are under tension, and a released spring can snap back hard enough to injure a hand or crack the sash. On impact-rated units, the glazing and frame are engineered as a system – reinstalling one incorrectly compromises the rating you paid for. Call (866) 977-0526 and we’ll tell you over the phone whether it’s a part swap or something bigger.
FAQs

Expect 20 to 25 years from the frame and glass on a well-installed unit, but hardware like balances and rollers often needs attention at the 8 to 12 year mark in southern Nevada’s heat and dust. The sun exposure here is harder on vinyl and seals than in milder climates. Call (866) 977-0526 for an exact assessment of your unit.
Often yes. A balance, roller, lock, or weatherstrip can usually be swapped without touching the glass or frame, which keeps the cost well under a full replacement. We’ll only recommend replacement when the frame or glass unit itself has failed. Call (866) 977-0526 and we’ll give you a straight answer.
A single hardware part is typically a one-visit job, usually under two hours. A full window or door replacement depends on the number of openings, but most Paradise projects run one to three days. You’ll get a live arrival time and photo updates before and after, per The Relay Visibility Guarantee. Call (866) 977-0526 to schedule your free estimate.
We identify your model from the label or measurements, then order through authorized channels – OEM for balance systems and locks, quality aftermarket for rollers and weatherstrip where it makes sense. We never guess at a part number. Call (866) 977-0526 and we’ll walk you through what we’d order for your unit.
If your Tremron window or door has a failed part, don’t wait for it to turn into a bigger repair. Call Sawyer Remodeling Paradise at (866) 977-0526 for a free estimate – we’ll match the part to your model, put the price in writing before any work starts, and back the job with our 365-Day Done Right Promise.
Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.












