







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Fence Installation: The Paradise Owner’s Guide
Unilock-compatible fence installation in Paradise typically runs $3500 – $9000, depending on linear footage, post spacing, and whether old panels and footings come out first. We’re an independent contractor, not affiliated with Unilock, and we schedule these as planned work rather than same-day drop-ins, so you’ll get a confirmed arrival window instead of a four-hour guess. Most owners here find out something’s wrong the same way: a post leans a few degrees after a summer of ground movement, a gate drags along the bottom rail, or a panel sags because a bracket gave out. That lean is rarely the fence itself. It’s usually the anchor, footing, or hinge hardware that failed first, and the fence took the blame.
Which Unilock Models This Applies To

Unilock makes both hardscape and fence systems, and homeowners often call us about one when they mean the other. Before we quote anything we confirm the exact product line from the original invoice, the panel or post label, or a tape-measure check of post spacing and panel height, because the anchor and bracket sets aren’t interchangeable between lines. Get that measurement wrong and a replacement hardware kit won’t seat, which is the number one reason a Paradise fence job gets redone.
On the OEM-versus-aftermarket question: OEM Unilock parts are the safest match when your panels are still under their manufacturer warranty, since a mismatched third-party kit can void the coverage. For out-of-warranty fences, a quality aftermarket anchor or bracket set in the correct gauge often performs identically for less money. We tell you which path makes sense for your specific panel instead of defaulting to the pricier one. If you’re also weighing hardscape or interior work, we handle KraftMaid, Cambria, and Silestone selections through the same process.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Fence Installation Is Failing
Nevada’s freeze-thaw swings and summer soil contraction work fence hardware harder than most owners expect. Here’s what actually signals a problem:
- A post that leans after rain or heat. The footing or anchor has shifted, not the panel. Left alone, the lean compounds and pulls the whole run out of line.
- A gate that drags or won’t latch. Hinge hardware or a sagging post is the culprit. A dragging gate is a warning, not a quirk to live with.
- Rattling or loose panels. Worn brackets or fasteners have backed out. This is the cheapest fix if you catch it early.
- Rust or corrosion at brackets and anchors. Paradise’s dry air doesn’t stop corrosion once moisture gets trapped at a fitting. Corroded hardware fails without warning.
- Visible cracks or chips at panel edges. Impact damage or footing movement. Cracks at the base usually point to a footing issue underneath.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed fence work in Paradise lands between $3500 and $9000 for the lead range on this page. Where you fall inside it depends on linear footage, how many posts need resetting, whether footings must be replaced, and gate count.
| Line item | Typical range |
|---|---|
| Fence installation (full run) | $3500 – $9000 |
| Post reset or re-anchor (per post) | quoted per job |
| Gate hardware and hinge replacement | quoted per job |
Every quote is a written line-item price before any work starts, so the invoice matches the number you approved. Parts and labor are broken out separately, and the install is covered by our 365-Day Done Right Promise. If the repair fails inside the year, we come back and make it right at no argument.
DIY or Call Us?
You can safely walk the fence line, check for lean with a level, tighten an exposed bolt, and photograph labels for model identification. That’s where the safe DIY work ends. Resetting a post means digging out and repouring a footing, and a fence under tension can kick back when you release a bracket, which is how fingers and wrists get hurt. Panel and anchor specs also vary by Unilock line, and the wrong hardware won’t seat or hold.
We’d rather you call than guess. Reach us at (866) 977-0526 for a free estimate on the fence in Paradise, and we’ll tell you plainly whether it’s a hardware swap or a footing job.
FAQs

Expect 15 to 25 years from a well-installed Unilock fence in Paradise, with hardware as the weak point. Brackets, anchors, and hinges typically need attention well before the panels do, especially with the valley’s seasonal ground movement.
Yes, often. A leaning post, dragging gate, or loose panel is usually a hardware or footing fix, not a full replacement. We assess the actual failure point and quote the repair before recommending a new run.
A hardware or gate swap is typically a day; a post reset or partial run replacement runs longer, usually two to three days. We confirm the schedule before work starts and send photo updates as it moves.
We identify your Unilock line first, then source OEM hardware when warranty coverage depends on it or a quality aftermarket equivalent when it doesn’t. Either way, the part is matched to your panel spec before it’s ordered.
Ready to get a straight price on your fence? Call (866) 977-0526 for a free estimate. Our technicians have up to 21 years of experience, and every job runs under The Relay Visibility Guarantee: a live arrival time, photo updates before and after, and a written price before a tool is picked up.
Written by the team at Sawyer Remodeling Paradise, serving Paradise and nearby areas.












