







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Paradise Homeowners Choose Unilock Construction
Sawyer Remodeling Paradise provides independent Unilock construction, repair and installation service in Paradise, NV. We set Unilock pavers, retaining wall blocks and step units as an independent installer, not a dealer, so the recommendation you get is based on your site, your drainage and your budget. What separates our Unilock work is the base: we compact in lifts, specify edge restraint for the load, and finish with the right polymeric joint sand for a desert climate that swings between monsoon soaking and 110°F drying. That’s the difference between a patio that holds its grade and one that starts heaving in two seasons.
We’re not affiliated with, sponsored by or authorized by Unilock, and we don’t claim any manufacturer warranty endorsement. Our technicians have up to 21 years of experience with hardscape systems, and every job runs under The Relay Visibility Guarantee: a written price before work starts, a live arrival time, and before-and-after photo updates. Call (866) 977-0526 for a free estimate.
Why Trust Sawyer Remodeling Paradise for Your Unilock Construction?

Trust on a hardscape job comes down to whether the person setting your units knows how they fail. Ours do. Unilock’s tumbled and modular systems have specific behaviors, and our technicians have spent years learning them: how Brussels Block behaves when the base holds water, why Beacon Hill and Town Hall courses lean when the first lift wasn’t compacted, where U-Cara panels need cap and coping units set true.
We work with Unilock-compatible parts and the matching manufacturer edge restraint, cap and coping units rather than dimensionally different lookalikes that shear the joints. That’s a warranty-safe practice: we don’t cut corners that put your install out of spec, and we don’t make a claim on your behalf about what Unilock will or won’t cover. The 365-Day Done Right Promise runs on our workmanship regardless. If something we set isn’t right, we make it right, backed in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Fix in Paradise
Paradise’s desert-southwest cycle drives most of what we’re called out for. Monsoon-season saturation soaks the base, then weeks of intense dry heat pull moisture back out, and the units and joints move. Here’s what that looks like in the field:
- Efflorescence bloom on Brussels Block and other tumbled pavers. White salt staining across the face that keeps coming back after you rinse it. It’s moisture migrating through the unit, and it returns because the base stays wet. Cleaning it without fixing drainage and grading is a temporary fix. You’ll see it worse on north-facing patios where evaporation is slow.
- Beacon Hill and Town Hall wall courses settling or leaning. The base course wasn’t compacted in lifts, or no geogrid was specified for the retained height. On a Paradise wall that holds back soil after a monsoon, that shows up as a lean within a season or two.
- Joint sand washing out on slopes and at driveway aprons. Water runs the joint line, sand leaves, pavers shift, and edge restraints spread. Once the restraint lets go, the whole field starts opening up.
- Chipping and spalling at saw-cut edges and step nosings. Cuts made dry, or units laid without proper edge restraint taking the traffic load. The nosing is where it shows first.
- U-Cara panel joints opening at cap and coping transitions. Where the cap wasn’t set to the same plane as the panel field, water sits on the joint and the seal breaks down.
Unilock Parts & Our Repair-vs-Replace Approach

For Unilock systems, we finish with the matching manufacturer edge restraint, cap and coping units and a polymeric joint sand rated for the application. Aftermarket lookalikes often differ in dimension and shear the joints. We don’t claim local stock; parts are sourced per job to the spec the site needs, which takes a few days to line up.
Our repair-vs-replace call is honest. A leaning wall or heaving pavers usually means the base and restraint failed, and repairing those beats replacement. Full tear-out only makes sense when the sub-base itself has failed. We’ll show you what we find when we pull a section. Call (866) 977-0526 for a free estimate.
Our Unilock Service Process – Step by Step
- 1
Diagnosis. We pull a section to see the base, check grading for positive drainage, and identify whether the failure is efflorescence, restraint, joint sand or sub-base.
- 2
Repair or install. Re-compact the aggregate base in lifts, re-grade away from the house, set Unilock units on the correct restraint, finish with polymeric joint sand. Step units and copings go on true.
- 3
Test. We water-test the slope and check restraint seating before we call it done. Before-and-after photos go to you.
- 4
Warranty. Written price before work, 365-Day Done Right Promise after. If a repair fails, a free second visit; no argument.
See the difference
Before
After
Before
After
Before
AfterUnilock Products We Service & Install in Paradise
We work across Unilock’s paver and wall families: Brussels Block for tumbled dimensional paving, Beacon Hill for large-format tumbled walls, Town Hall for garden and seat walls, and U-Cara for modular retaining walls. We also handle the matching edge restraint, cap, coping and step units these systems need to finish true. If you’re planning a paver patio, paver driveway or driveway replacement in Paradise, we’ll spec the family to the load and drainage the site actually has. Our material roster also includes KraftMaid, Cambria, Silestone and Kohler.
We Also Service These Brands
Unilock is one piece of what we do. Sawyer Remodeling Paradise also works with KraftMaid cabinetry, Cambria and Silestone countertops and Kohler fixtures on the remodeling side, so an owner can handle a single hardscape repair or a full project with one team and one written price. Not single-brand dependent.
FAQs – Unilock Construction Service in Paradise

Is Sawyer Remodeling Paradise authorized by Unilock? No. We’re an independent installer with no manufacturer authorization or warranty endorsement. That independence means our recommendations follow the site’s needs, not a dealer quota. Call (866) 977-0526 for a free estimate.
Do you use genuine Unilock/OEM parts? Yes. We finish with the matching manufacturer edge restraint, cap and coping units and a properly rated polymeric joint sand. Aftermarket lookalikes often differ in dimension and shear the joints. We source per job rather than stocking locally. Call (866) 977-0526 for a free estimate.
How long does Unilock service take? A repair is often a day or two once parts are in; a full paver patio or driveway runs several days to a few weeks depending on size and base work. Desert heat drives early-morning schedules. Call (866) 977-0526 for a written timeline and price.
What Unilock models/series do you cover? Brussels Block, Beacon Hill, Town Hall and U-Cara, plus their edge restraint, cap, coping and step units. Call (866) 977-0526 to confirm your series.
Will service void my Unilock warranty? Not if the install is done to spec. We use manufacturer-matching restraint and joint sand and don’t cut corners that put your work out of spec. We don’t speak for Unilock’s coverage. Call (866) 977-0526 with questions before we start.
How much does Unilock construction cost in Paradise? Paver work runs in these ranges, and a written line-item price comes before any work starts. Call (866) 977-0526 for an exact quote. Estimates are free.
| Service | Price Range |
|---|---|
| Paver Patio Installation | $3,500 – $11,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Replacement | $5,000 – $14,000 |
Book Your Unilock Service in Paradise, NV
Whether it’s efflorescence that keeps returning, a leaning Beacon Hill wall or a driveway replacement, we’ll pull a section, tell you straight what failed, and put the number in writing before we start. Call (866) 977-0526 to schedule your free estimate in Paradise.
Written by the team at Sawyer Remodeling Paradise.












